B1163 LINCOLN - Left Power Running Board Hall-Effect Sensor Failure
B1163 LINCOLN Possible Causes
- Faulty Power Running Board Motor Assembly
- Power Running Board Motor Assembly harness is open or shorted
- Power Running Board Motor Assembly circuit poor electrical connection
- Faulty Power Running Board (PRB) Module
First diagnose B1163 LINCOLN code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the B1163 LINCOLN code
Labor: 1.0The cost of diagnosing the B1163 LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B1163 LINCOLN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1163 LINCOLN MeaningThe Power Running Board (PRB) module provides a regulated 10-volt power supply to the Hall-effect sensor (internal to the PRB motor) through the circuit. The Hall-effect ground is provided by the PRB module through the circuit. The PRB module monitors the PRB Hall-effect signal through the circuit. If the PRB module does not receive any signal from the Hall-effect sensor during operation, the PRB will stop. The PRB module sets this Diagnostic Trouble Code (DTC) if it does not see any feedback from the Hall-Effect sensor during the stowing/deploying of the LH running board.
B1163 LINCOLN More InformationNeed more information on how to fix the B1163 LINCOLN code?
Get Access to Factory Service Manuals