B1140 Scion Code - Side Airbag Sensor Assembly Malfunction
Quick Answer
The B1140 diagnostic trouble code for Scion vehicles indicates a malfunction in the side airbag sensor assembly. Common causes include Faulty side airbag sensor assembly, Wiring or electrical issues in the airbag system, Corrosion or damage to the sensor assembly connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1140 Scion indicates Side Airbag Sensor Assembly Malfunction.
- Common causes
- Common causes include Faulty side airbag sensor assembly, Wiring or electrical issues in the airbag system, Corrosion or damage to the sensor assembly connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1140 Scion Description
The B1140 diagnostic trouble code for Scion vehicles indicates a malfunction in the side airbag sensor assembly. This component is crucial for the proper functioning of the side airbag system, which is designed to deploy in the event of a side impact collision to provide additional protection for the vehicle's occupants. When this sensor assembly malfunctions, it can compromise the effectiveness of the side airbags, potentially putting passengers at risk in the event of a collision.
Common Causes of B1140 Scion
- Faulty side airbag sensor assembly.
- Wiring or electrical issues in the airbag system.
- Corrosion or damage to the sensor assembly connectors.
- Impact or physical damage to the sensor assembly.
- Issues with the airbag control module.
Symptoms of B1140 Scion
- Airbag warning light illuminated on the dashboard.
- Side airbags not deploying in a side impact collision.
- Fault codes related to the side airbag sensor assembly stored in the vehicle's computer.
- Inconsistent or erratic behavior of the side airbag system.
How to Fix B1140 Scion
- Begin by diagnosing the specific cause of the B1140 code using a professional diagnostic scan tool.
- Inspect the side airbag sensor assembly and its connectors for any signs of damage or corrosion.
- Test the wiring and electrical connections in the airbag system for continuity and proper voltage.
- Replace the faulty side airbag sensor assembly if necessary.
- Clear the fault codes from the vehicle's computer and perform a test to ensure that the issue has been resolved.
Cost to Fix B1140 Scion
The typical repair costs for addressing a B1140 code on a Scion vehicle can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost may vary depending on the specific cause of the issue, the extent of the repairs needed, and the labor rates at the auto repair shop. It's recommended to consult with a professional mechanic to get an accurate estimate for the repair.
Need more information about the B1140 Scion code?
Need more information on how to fix the B1140 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1140 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1140 Scion Code
1. What are common symptoms of the OBDII code B1140 in a Scion related to the side airbag sensor assembly malfunction?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the side airbag system deployment.
2. What are possible causes of the OBDII code B1140 in a Scion indicating a side airbag sensor assembly malfunction?
- Possible causes include damaged wiring, a faulty side airbag sensor assembly, or issues with the airbag control module.
3. How can I diagnose the OBDII code B1140 in a Scion for a side airbag sensor assembly malfunction?
- Diagnosis involves using an OBDII scanner to retrieve the specific fault code, checking the wiring and connections related to the side airbag sensor assembly, and testing the sensor itself.
4. Can I continue driving my Scion with the OBDII code B1140 indicating a side airbag sensor assembly malfunction?
- It is not recommended to continue driving the vehicle until the issue is resolved, as it may affect the proper functioning of the side airbag system in the event of a collision.
5. How can I repair the OBDII code B1140 in a Scion if it is caused by a side airbag sensor assembly malfunction?
- Repair typically involves replacing the faulty side airbag sensor assembly, repairing any damaged wiring or connections, and clearing the fault code from the vehicle's system.
6. Is it necessary to reset the airbag system after repairing the OBDII code B1140 in a Scion due to a side airbag sensor assembly malfunction?
- Yes, it is important to reset the airbag system using a compatible OBDII scanner after repairing the issue to ensure proper functionality and to clear the fault code from the system.
7. Are there any safety precautions to consider when working on the side airbag sensor assembly related to the OBDII code B1140 in a Scion?
- It is crucial to disconnect the vehicle's battery before working on the airbag system to prevent accidental deployment and to follow proper safety procedures outlined in the vehicle's service manual.
8. Can a DIY enthusiast repair the OBDII code B1140 in a Scion caused by a side airbag sensor assembly malfunction?
- While some DIY enthusiasts may have the skills to diagnose and repair wiring issues, it is recommended to consult a professional technician for more complex tasks like replacing the side airbag sensor assembly.
9. How can I prevent the OBDII code B1140 from reoccurring in my Scion after repairing the side airbag sensor assembly malfunction?
- Regularly inspecting and maintaining the airbag system, ensuring proper wiring connections, and addressing any warning lights promptly can help prevent the recurrence of the B1140 fault code.
10. Are there any recalls or service bulletins related to the OBDII code B1140 in a Scion for a side airbag sensor assembly malfunction?
- It is recommended to check with the manufacturer or authorized dealerships for any recalls or service bulletins related to the B1140 fault code to see if there are any known issues or remedies available.
Discuss the causes and fixes for B1140 Scion OBDII Code
Code B1140 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.