B113E Lincoln Code - External Boot/Trunk Release Switch Signal Stuck Low
Quick Answer
The B113E diagnostic trouble code for Lincoln vehicles indicates that the external boot/trunk release switch signal is stuck low. Common causes include Faulty trunk release switch, Wiring issues or short circuits in the trunk release system, Defective body control module (BCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B113E Lincoln indicates External Boot/Trunk Release Switch Signal Stuck Low.
- Common causes
- Common causes include Faulty trunk release switch, Wiring issues or short circuits in the trunk release system, Defective body control module (BCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B113E Lincoln Description
The B113E diagnostic trouble code for Lincoln vehicles indicates that the external boot/trunk release switch signal is stuck low. This means that the signal from the switch that is used to open the trunk or boot of the vehicle is not functioning properly. The switch is designed to send a signal to the vehicle's body control module (BCM) when activated, allowing the trunk to open. When the signal is stuck low, it means that the BCM is not receiving the proper input from the switch, which can prevent the trunk from opening.
Common Causes of B113E Lincoln
- Faulty trunk release switch.
- Wiring issues or short circuits in the trunk release system.
- Defective body control module (BCM).
- Poor connection between components in the trunk release system.
Symptoms of B113E Lincoln
- Inability to open the trunk using the external switch.
- Trunk release switch not responding when pressed.
- Trunk release switch feeling loose or unresponsive.
- Warning light on the dashboard related to trunk release system.
How to Fix B113E Lincoln
- Begin by inspecting the trunk release switch for any visible damage or wear. Replace the switch if necessary.
- Check the wiring and connections related to the trunk release system for any signs of damage or corrosion. Repair or replace as needed.
- Test the body control module (BCM) to ensure it is functioning properly. Replace the BCM if it is found to be faulty.
- Clear the diagnostic trouble code from the vehicle's computer using a diagnostic scanner.
- Test the trunk release system to ensure proper functionality after repairs have been completed.
Cost to Fix B113E Lincoln
The typical repair costs for addressing the B113E code on a Lincoln vehicle can vary depending on the specific cause of the issue. In general, replacing a trunk release switch can cost between $50 and $150, while repairing wiring or connections may range from $100 to $300. If the body control module needs to be replaced, this can add an additional $200 to $500 to the total repair cost. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors. It's recommended to consult with a qualified mechanic for a more accurate estimate based on the specific circumstances of the vehicle.
Need more information about the B113E Lincoln code?
Need more information on how to fix the B113E Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B113E Lincoln code diagnosed by a professional: Find a repair shop in your area
Information for Specific Lincoln Models
- B113E 2008 Lincoln Town_car — Rear Climate Control Switch Circuit Short to Ground
Frequently Asked Questions about B113E Lincoln Code
1. What are the common symptoms of OBDII code B113E in a Lincoln related to the external boot/trunk release switch signal stuck low?
- The common symptoms include difficulty opening the trunk using the external release switch, the trunk not opening at all, or the trunk opening unexpectedly.
2. What can cause the external boot/trunk release switch signal to be stuck low in a Lincoln triggering the B113E code?
- Possible causes include a faulty external boot/trunk release switch, a wiring issue, a malfunctioning trunk latch, or a problem with the body control module.
3. How can I diagnose the issue causing the external boot/trunk release switch signal to be stuck low in my Lincoln?
- You can start by checking the external switch for proper functionality, inspecting the wiring for any damage or loose connections, testing the trunk latch, and performing a scan for fault codes with an OBDII scanner.
4. Is it safe to continue driving my Lincoln with the B113E code indicating the external boot/trunk release switch signal stuck low?
- It is generally safe to drive the vehicle with this code, but it is important to address the issue promptly to avoid inconvenience and potential safety concerns related to accessing the trunk.
5. Can I repair the B113E code issue related to the external boot/trunk release switch signal stuck low in my Lincoln myself?
- Depending on your experience and tools, you may be able to repair this issue yourself by replacing the faulty switch, repairing any damaged wiring, or addressing other potential causes. However, professional assistance may be needed for complex issues.
6. Are there any temporary solutions to consider if I encounter the external boot/trunk release switch signal stuck low in my Lincoln?
- One temporary solution could be using the manual trunk release mechanism inside the vehicle until the root cause of the issue is identified and resolved.
7. How much can I expect to pay for repairing the B113E code issue related to the external boot/trunk release switch signal stuck low in a Lincoln?
- The cost of repair can vary depending on the specific cause of the issue, labor rates, and parts needed. It is recommended to obtain quotes from reputable repair shops for an accurate estimate.
8. Will clearing the OBDII code B113E related to the external boot/trunk release switch signal stuck low make the issue go away permanently?
- Clearing the code may temporarily turn off the warning light, but if the root cause of the problem is not addressed, the code is likely to reappear once the issue is detected again.
9. How urgent is it to address the B113E code indicating the external boot/trunk release switch signal stuck low in a Lincoln?
- While it may not be an emergency, addressing the issue in a timely manner is recommended to prevent inconvenience and ensure proper functionality of the trunk release system.
10. Can a malfunctioning external boot/trunk release switch impact other vehicle systems in a Lincoln triggering the B113E code?
- A malfunctioning external switch can potentially affect other systems that rely on the trunk release signal, such as the security system or interior trunk release mechanism.
Discuss the causes and fixes for B113E Lincoln OBDII Code
Code B113E Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.