Engine-Codes.com
Engine-Codes – Nissan – B1134 Nissan

B1134 Nissan Code - Left Right Side Air Bag Module Open

Quick Answer

The B1134 code for Nissan vehicles indicates that there is an issue with the left or right side airbag module being open. Common causes include Loose or damaged wiring in the airbag system, Faulty airbag module on the left or right side, Corrosion in the electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1134 Nissan indicates Left Right Side Air Bag Module Open.
Common causes
Common causes include Loose or damaged wiring in the airbag system, Faulty airbag module on the left or right side, Corrosion in the electrical connections.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1134 Nissan Description

The B1134 code for Nissan vehicles indicates that there is an issue with the left or right side airbag module being open. This means that the airbag on either side of the vehicle may not deploy properly in the event of a collision, potentially putting the occupants at risk of injury. The airbag module is a crucial safety component in modern vehicles, designed to inflate rapidly upon impact to protect the driver and passengers from hitting hard surfaces inside the vehicle.

OBDII Code B1134 Nissan - Left Right Side Air Bag Module Open
B1134 Nissan Code - Left Right Side Air Bag Module Open

Common Causes of B1134 Nissan

  1. Loose or damaged wiring in the airbag system
  2. Faulty airbag module on the left or right side
  3. Corrosion in the electrical connections
  4. Impact or damage to the airbag system components
  5. Faulty airbag sensor detecting an open circuit

Symptoms of B1134 Nissan

  1. Airbag warning light illuminated on the dashboard
  2. Fault code stored in the vehicle's computer system
  3. Inability to turn off the airbag warning light
  4. No deployment of the left or right side airbag during a crash

How to Fix B1134 Nissan

  1. Diagnose the specific cause of the open circuit in the left or right side airbag module using a diagnostic scanner.
  2. Inspect the wiring and connections for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Check the airbag module on the affected side for any faults or malfunctions. Replace if needed.
  4. Clear the fault codes from the vehicle's computer system and test the airbag system to ensure proper functionality.
  5. Reset the airbag warning light on the dashboard if it was illuminated.

Cost to Fix B1134 Nissan

The cost of repairing a B1134 code for a Nissan vehicle can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the repair costs for addressing an open circuit in the left or right side airbag module can range from $200 to $500. This estimate includes the cost of parts and labor. Keep in mind that additional diagnostics or repairs may be needed depending on the extent of the issue. It is recommended to consult with a certified mechanic or dealership for a more accurate cost estimate based on your vehicle's make and model.

Need more information about the B1134 Nissan code?

Need more information on how to fix the B1134 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1134 Nissan code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1134 Nissan Code

1. What does the OBDII code B1134 mean on a Nissan?

The code B1134 indicates an open circuit in the left or right side airbag module, which may prevent the airbag from deploying properly in a collision.

2. What are the common symptoms of code B1134 in a Nissan?

Common symptoms include an illuminated airbag warning light on the dashboard and potentially disabled side airbags.

3. What causes the B1134 code to appear on a Nissan?

The code can be caused by faulty wiring, a damaged side airbag module, a loose or corroded connector, or a malfunctioning airbag control unit.

4. Is it safe to drive with the B1134 code active?

It’s not recommended to drive with this code active, as it indicates a potential issue with the airbag system, which may compromise passenger safety in an accident.

5. How do you diagnose the B1134 code on a Nissan?

Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors for damage, and testing the side airbag module for continuity.

6. Can the B1134 code be cleared without repairs?

The code can be cleared temporarily with an OBDII scanner, but if the underlying issue isn’t fixed, the code will likely reappear.

7. How much does it cost to fix the B1134 code on a Nissan?

Repair costs vary depending on the issue, but replacing a side airbag module or repairing wiring typically costs between $200 and $1,000.

8. Can a loose connector cause the B1134 code on a Nissan?

Yes, a loose or corroded connector in the side airbag circuit can trigger the B1134 code.

9. Do I need to replace the airbag module to fix the B1134 code?

Not necessarily. The issue might be with the wiring or connectors, so a thorough inspection should be done before replacing the airbag module.

10. Can I fix the B1134 code on my Nissan myself?

If you’re experienced with automotive electrical systems, you might be able to repair damaged wiring or connectors, but replacing airbag components should be handled by a professional for safety.

Discuss the causes and fixes for B1134 Nissan OBDII Code

Submit a New Comment

Code B1134 Nissan comments

No comments found for this page.