B1122 Infiniti Code - Diagnosis Sensor Unit
Quick Answer
The B1122 code in Infiniti vehicles refers to an issue with the Diagnosis Sensor Unit. Common causes include Faulty Sensor Unit: The Diagnosis Sensor Unit itself may be defective or damaged, causing communication errors and triggering the B1122 code, Wiring Issues: Corrosion, damage, or loose connections in the wiring harnesses connected to the sensor unit can disrupt communication and lead to this code, ECM Malfunction: A malfunctioning engine control module (ECM) can also cause communication errors with the Diagnosis Sensor Unit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1122 Infiniti indicates Diagnosis Sensor Unit.
- Common causes
- Common causes include Faulty Sensor Unit: The Diagnosis Sensor Unit itself may be defective or damaged, causing communication errors and triggering the B1122 code, Wiring Issues: Corrosion, damage, or loose connections in the wiring harnesses connected to the sensor unit can disrupt communication and lead to this code, ECM Malfunction: A malfunctioning engine control module (ECM) can also cause communication errors with the Diagnosis Sensor Unit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1122 Infiniti Description
The B1122 code in Infiniti vehicles refers to an issue with the Diagnosis Sensor Unit. This sensor unit is a crucial component of the vehicle's onboard diagnostic system, responsible for monitoring various systems and detecting any malfunctions or abnormalities. When this code is triggered, it indicates that there is a problem with the sensor unit itself or its communication with other systems in the vehicle.
Common Causes of B1122 Infiniti
- Faulty Sensor Unit: The Diagnosis Sensor Unit itself may be defective or damaged, causing communication errors and triggering the B1122 code.
- Wiring Issues: Corrosion, damage, or loose connections in the wiring harnesses connected to the sensor unit can disrupt communication and lead to this code.
- ECM Malfunction: A malfunctioning engine control module (ECM) can also cause communication errors with the Diagnosis Sensor Unit.
- Software Glitch: An issue with the software or programming of the sensor unit or ECM can result in the B1122 code being triggered.
- Environmental Factors: Extreme temperatures, moisture, or contaminants can affect the sensor unit's performance and trigger this code.
Symptoms of B1122 Infiniti
- Check Engine Light: The most common symptom associated with the B1122 code is the illumination of the check engine light on the dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in power or acceleration due to the sensor unit's malfunction.
- Poor Fuel Efficiency: A faulty Diagnosis Sensor Unit can lead to increased fuel consumption and decreased mileage.
- Rough Idling: The engine may idle roughly or inconsistently, indicating a problem with the sensor unit's readings.
- Transmission Issues: The vehicle may exhibit shifting problems or erratic behavior in the transmission as a result of the B1122 code.
How to Fix B1122 Infiniti
- Diagnostic Scan: Begin by using a diagnostic scanner to retrieve the specific error codes, including the B1122 code, and identify the root cause of the issue.
- Inspect Wiring: Check the wiring harnesses connected to the Diagnosis Sensor Unit for any signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Test Sensor Unit: Test the Diagnosis Sensor Unit itself to determine if it is functioning correctly. Replace the sensor unit if it is found to be faulty.
- Check ECM: Inspect the engine control module (ECM) for any malfunctions or software glitches that may be causing communication errors with the sensor unit. Repair or replace the ECM if necessary.
- Clear Codes: After completing the repairs, clear the error codes using the diagnostic scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix B1122 Infiniti
The typical repair costs for addressing the B1122 code in an Infiniti vehicle can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, the cost of replacing a faulty Diagnosis Sensor Unit can range from $200 to $500, including parts and labor. However, if additional repairs or replacements are required for the wiring harnesses or ECM, the total cost may increase accordingly.
Need more information about the B1122 Infiniti code?
Need more information on how to fix the B1122 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1122 Infiniti code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1122 Infiniti Code
1. What are the common symptoms of OBDII code B1122 in an Infiniti?
- Common symptoms include issues with the airbag system, such as the airbag light staying on, the airbag not deploying in an accident, or warning messages on the dashboard.
2. What can cause the OBDII code B1122 in an Infiniti?
- The most common cause of code B1122 in an Infiniti is a malfunction or failure of the Diagnosis Sensor Unit within the airbag system.
3. How serious is OBDII code B1122 in an Infiniti?
- Code B1122 should be taken seriously as it indicates a problem with the airbag system, which could potentially compromise the safety of the vehicle in the event of a collision.
4. Can I continue driving my Infiniti with OBDII code B1122?
- It is not recommended to drive the vehicle with code B1122 present, as the airbag system may not function properly in the event of an accident.
5. How can I diagnose and repair OBDII code B1122 in my Infiniti?
- Diagnosis and repair of code B1122 typically involve inspecting the Diagnosis Sensor Unit, checking the wiring and connections, and potentially replacing the sensor unit if necessary.
6. Is it possible to reset OBDII code B1122 in an Infiniti without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is important to address the root cause of the problem to ensure the safety and functionality of the airbag system.
7. Are there any DIY tips for troubleshooting OBDII code B1122 in an Infiniti?
- DIY troubleshooting tips include checking the airbag fuse, inspecting the airbag connectors for loose or damaged wires, and ensuring the Diagnosis Sensor Unit is properly connected.
8. How much does it cost to repair OBDII code B1122 in an Infiniti?
- The cost of repairing code B1122 can vary depending on the extent of the issue and whether the Diagnosis Sensor Unit needs to be replaced. It is advisable to consult a professional for an accurate estimate.
9. Can a mechanic help me fix OBDII code B1122 in my Infiniti?
- Yes, a qualified mechanic with experience in airbag systems can diagnose and repair code B1122 in your Infiniti to ensure the proper functioning of the airbag system.
10. Will fixing OBDII code B1122 in my Infiniti affect the vehicle's warranty?
- If your Infiniti is still under warranty, it is recommended to have the issue addressed by an authorized dealership or service center to ensure compliance with warranty terms and conditions.
Discuss the causes and fixes for B1122 Infiniti OBDII Code
Code B1122 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.