B10D9 FORD Possible Causes
- Faulty PATS Transceiver
- PATS Transceiver harness is open or shorted
- PATS Transceiver circuit poor electrical connection
- Faulty Instrument Panel Cluster (IPC)
- Incorrect PATS transceiver part number
How do I fix code B10D9 FORD
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B10D9 FORD code
Labor: 1.0The cost of diagnosing the B10D9 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B10D9 FORD Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B10D9 FORD MeaningThe Passive Anti-Theft System (PATS) transceiver receives voltage from the Smart Junction Box (SJB). The PATS transceiver and the Instrument Panel Cluster (IPC) communicate on dedicated transmit and receive circuits. The IPC compares the key code stored in memory and sends a signal to the Powertrain Control Module (PCM) to enable the starter and the fuel injectors if the key code is correct. The OBDII code set when the PATS transceiver signal is not received by the IPC. This Diagnostic Trouble Code (DTC) can be caused by circuits between the PATS transceiver and the IPC. This can also be caused by using the incorrect PATS transceiver part number.
B10D9 FORD More InformationNeed more information on how to fix the B10D9 FORD code?
Get Access to Factory Service Manuals