B10C4 MERCURY - Right Rear Unlock Pull Switch Signal Stuck High
B10C4 MERCURY Possible Causes
- Faulty Right Rear Unlock Pull Switch
- Right Rear Unlock Pull Switch harness is open or shorted
- Right Rear Unlock Pull Switch circuit poor electrical connection
- Faulty Remote Function Actuator (RFA) Module
First diagnose B10C4 MERCURY code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the B10C4 MERCURY code
Labor: 1.0The cost of diagnosing the B10C4 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B10C4 MERCURY Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B10C4 MERCURY MeaningThe Remote Function Actuator (RFA) Module interprets radio frequency signals from the Remote Functions Receiver (RFR) Module and Intelligent Access (IA) key transmitters. The RFA module receives input signals from various modules and other components. Based on this information, the RFA module generates an output signal to control various components such as the door locks and the liftgate. The OBDII code sets when the RFA module detects the right rear unlock sensor activated for more than 5 minutes.
B10C4 MERCURY More InformationNeed more information on how to fix the B10C4 MERCURY code?
Get Access to Factory Service Manuals