Engine-Codes
 
OBDII Code List
 
B10C2 MERCURY

B10C2 MERCURY - Left Rear Unlock Pull Switch Signal Stuck High

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

B10C2 MERCURY Possible Causes

  • Faulty Left Rear Unlock Pull Switch
  • Left Rear Unlock Pull Switch harness is open or shorted
  • Left Rear Unlock Pull Switch circuit poor electrical connection
  • Faulty Remote Function Actuator (RFA) Module

First diagnose B10C2 MERCURY code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the B10C2 MERCURY code

    Labor: 1.0

    The cost of diagnosing the B10C2 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

B10C2 MERCURY Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B10C2 MERCURY Meaning

The Remote Function Actuator (RFA) Module interprets radio frequency signals from the Remote Functions Receiver (RFR) Module and Intelligent Access (IA) key transmitters. The RFA module receives input signals from various modules and other components. Based on this information, the RFA module generates an output signal to control various components such as the door locks and the liftgate. The OBDII code sets when the RFA module detects the left rear unlock sensor activated for more than 5 minutes.
OBDII Code B10C2 MERCURY - Left Rear Unlock Pull Switch Signal Stuck High - Engine-Codes.com

B10C2 MERCURY More Information

Need more information on how to fix the B10C2 MERCURY code?
Get Access to Factory Service Manuals

Related Information