B10AC JEEP - Right Blend Door Control Circuit Open

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

B10AC JEEP Possible Causes

  • Binding Right Blend Door Actuator (Passenger)
  • Faulty Right Blend Door Actuator
  • Right Blend Door Actuator harness is open or shorted
  • Right Blend Door Actuator circuit poor electrical connection
  • Faulty A/C Heater Control

First diagnose B10AC JEEP code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the B10AC JEEP code

    Labor: 1.0

    The cost of diagnosing the B10AC JEEP code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

B10AC JEEP Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B10AC JEEP Meaning

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. These calibrations are stored as in the number of pulses it takes to move the door from one stop to another. The A/C Heater Control drives the Door Actuators by the use of Door Driver circuit and a Common Door Driver circuit and monitors all door actuator pulses to detect door movement in both directions. Most of the door actuators share a common door driver circuit but each door actuator has its own unique driver circuit. Due to shared circuitry, similar DTC's can set at the same time for multiple actuators depending upon the type of circuit malfunction, its location, and the direction the actuator is moving when the malfunction is present.
OBDII Code B10AC JEEP - Right Blend Door Control Circuit Open - Engine-Codes.com

B10AC JEEP More Information

Need more information on how to fix the B10AC JEEP code?
Get Access to Factory Service Manuals

Related Information