B10AB MERCURY - Remote Keyless Entry Synchronization No Sub Type Information
B10AB MERCURY Possible Causes
- Reprogram Integrated Key Transponder (IKT)
- Faulty Integrated Key Transponder (IKT)
First diagnose B10AB MERCURY code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the B10AB MERCURY code
Labor: 1.0The cost of diagnosing the B10AB MERCURY code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B10AB MERCURY Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B10AB MERCURY MeaningThe Remote Keyless Entry (RKE) feature is controlled by the Tire Pressure Monitor (TPM) module and the Body Control Module (BCM). When a button is pressed on an Integrated Key Transponder (IKT) the Transmitter Identification Code (TIC) and RKE command is received by the internal TPM module antenna. If the TPM module determines that it is a valid and programmed TIC, it sends the RKE command and TIC to the BCM over the MS-CAN. When the BCM receives the RKE command, it carries out the command by controlling the door locks or activating the horn and turn signals for the panic alarm. The RKE transmitters and the BCM also utilize a rolling code to prevent the code from being captured by a code grabber. The system advances the counter in the RKE transmitter and the BCM every time an RKE transmitter button is pressed. A Diagnostic Trouble Code (DTC) that sets when the BCM detects the rolling counter received from an RKE transmitter is out of synchronization with the rolling counter stored in the module.
B10AB MERCURY More InformationNeed more information on how to fix the B10AB MERCURY code?
Get Access to Factory Service Manuals