B106F LINCOLN Possible Causes
- Faulty Smart Junction Box (SJB)
- Smart Junction Box (SJB) harness is open or shorted
- Smart Junction Box (SJB) circuit poor electrical connection
First diagnose B106F LINCOLN code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the B106F LINCOLN code
Labor: 1.0The cost of diagnosing the B106F LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B106F LINCOLN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B106F LINCOLN MeaningWhen a repetitive fault causing a circuit overload is detected on certain output circuits, the Smart Junction Box (SJB) disables the circuit by removing voltage, or ground, to the affected circuit. The circuit remains disabled until the fault is corrected and an on-demand self-test is run. When the on-demand self-test has been run after all faults have been corrected, any Diagnostic Trouble Code (DTC) related to the fault are cleared.
B106F LINCOLN More InformationNeed more information on how to fix the B106F LINCOLN code?
Get Access to Factory Service Manuals