B103B LINCOLN - Thermoelectric Driver Overcurrent Low
B103B LINCOLN Possible Causes
- Faulty Thermo-Electric Device (TED) Assembly
- Thermo-Electric Device (TED) Assembly harness is open or shorted
- Thermo-Electric Device (TED) Assembly circuit poor electrical connection
- Faulty Dual Climate Controlled Seat Module (DCSM)
How is the B103B LINCOLN code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B103B LINCOLN code
Labor: 1.0The cost to diagnose the B103B LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
B103B LINCOLN MeaningThe seat cushion and backrest are equipped with a Thermo-Electric Device (TED) Assembly that includes a seat blower (fan motor, serviced as an assembly with the TED). When the Dual Climate Controlled Seat Module (DCSM) detects an overcurrent and/or overtemperature in the output circuits to the TEDs, it will disable the affected seat and set the following DTCs: DTC B103B (Thermoelectric Driver Overcurrent Low) If DCSM outputs to the driver seat backrest or cushion TED or any components within these circuit loops are shorted to ground or a TED resistance of less than 0.9 ohm is sensed, the DCSM shuts down the driver seat system and sets this DTC.
More InformationNeed more information on how to fix the B103B LINCOLN code?
Get Access to Factory Service Manuals