Engine-Codes - Generic - B1037

B1037 Code - Crash Zone Sensor 1

- Code Popularity: 1,226 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents

|What are the Possible Causes of the Code B1037?

  • Faulty Crash Zone Sensor 1
  • Crash Zone Sensor 1 harness is open or shorted
  • Crash Zone Sensor 1 circuit poor electrical connection
  • Faulty Airbag Diagnosis Sensor Unit (Air Bag Control Module)

|How to Fix the B1037 Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the Cost to Diagnose the Code B1037?

Labor: 1.0

The cost to diagnose the B1037 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your Car have Safety Recalls? → Check here

|What are Code B1037 Possible Symptoms?

  • Air Bag Warning Light ON

|What Does the B1037 Code Mean?

The main G sensor generates a signal voltage when it detects deceleration beyond the specified level caused by a vehicle frontal collision. When the airbag diagnosis sensor unit defines both the signal voltage of the G sensor and the safing algorithm to be that of a collision that exceeds a specified level, the driving circuit switches on and feeds the electric ignitor of both driver and passenger airbags and pre-tensioner seat belts. The Diagnostic Trouble Code (DTC) will set the Crash Zone Sensor 1 is malfunctioning.

B1037 Code - Crash Zone Sensor 1

|Need more Information on the B1037 Code?

Need more information on how to fix the B1037 code? Get Access to Factory Service Manuals

|Code B1037 Information for Specific Makes

|Need Help with the B1037 Code?

Get the B1037 code diagnosed by a professional: Find a repair shop in your area