B1032 Code - SDARS Satellite Antenna Short
|B1032 code possible causes
- Faulty Satellite Antenna
- Satellite Antenna harness is open or shorted
- Satellite Antenna circuit poor electrical connection
- Faulty Satellite Digital Audio Receiver System (SDARS) module (early build vehicles without navigation)
- Faulty Audio Control Module (ACM) (late build vehicles without navigation and all vehicles with navigation)
|How is the B1032 code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B1032 code
Labor: 1.0The cost to diagnose the B1032 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1032 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B1032 code meaning?Digital signals are received by the satellite radio antenna and sent to the Satellite Digital Audio Receiver System (SDARS) module, which then converts the signals and provides audio signals to the ACM.
Late Build Vehicles Without Navigation And All Vehicles With Navigation: Digital signals are received by the satellite radio antenna and sent directly to the ACM, as the satellite radio receiver is built into the ACM.
A short to ground in the satellite radio antenna typically has no effect on the antenna signal. However, an open in the antenna circuit results in no sound from the satellite radio system. A short to voltage in the antenna circuit can have varying effects on the system. The OBDII code sets when a short to ground or short to voltage is detected in the satellite antenna circuit. This DTC can be either continuous or on-demand and applies to early build vehicles without navigation.
|Need more information with the B1032 code?Need more information on how to fix the B1032 code?
Get Access to Factory Service Manuals