B1030 Code - Diagnosis Sensor Unit

Quick Answer

The B1030 code refers to an issue with the diagnosis sensor unit in the vehicle. Common causes include Wiring harness damage or corrosion, Faulty diagnosis sensor unit, Malfunctioning onboard computer. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means

B1030 indicates Diagnosis Sensor Unit.

Common causes

Common causes include Wiring harness damage or corrosion, Faulty diagnosis sensor unit, Malfunctioning onboard computer.

Severity

High - diagnose this code as soon as possible.

Can I drive?

Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

• Description
• Common Causes
• Symptoms
• How To Fix
• Cost to Fix
• FAQs
• Comments
• Add Comment

Common Causes of B1030

Symptoms of B1030

How to Fix B1030

Cost to Fix B1030

Need more information about the B1030 code?

Need more information on how to fix the B1030 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1030 code diagnosed by a professional: Find a repair shop in your area

Code B1030 Information for Specific Makes

• B1030 Chrysler — Evaporator Temperature Sensor Circuit Short To Ground
• B1030 Dodge — Evaporator Temperature Sensor Circuit Short To Ground
• B1030 Infiniti — Diagnosis Sensor Unit
• B1030 Jeep — Evaporator Temperature Sensor Circuit Short To Ground
• B1030 Nissan — Diagnosis Sensor Unit
• B1030 RAM — Evaporator Temperature Sensor Circuit Short To Ground

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

• Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
• Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1030 Code

1. What are the common symptoms of OBDII code B1030 (Diagnosis Sensor Unit)?

The common symptoms of OBDII code B1030 include issues with the airbag system, such as the airbag warning light staying illuminated on the dashboard.

2. What are the possible causes of OBDII code B1030?

The possible causes of OBDII code B1030 include a faulty diagnosis sensor unit, wiring issues, or a malfunction in the airbag control module.

3. How can I diagnose OBDII code B1030?

Diagnosing OBDII code B1030 involves using a professional OBDII scanner to retrieve the specific fault code and then inspecting the diagnosis sensor unit and related wiring for any visible damage.

4. Can I still drive my vehicle with OBDII code B1030 present?

It is not recommended to drive your vehicle with OBDII code B1030 present, as it indicates a potential issue with the airbag system that could affect its functionality in the event of a collision.

5. How do I repair OBDII code B1030?

Repairing OBDII code B1030 typically involves replacing the faulty diagnosis sensor unit or repairing any damaged wiring connections associated with the airbag system.

6. Are there any safety concerns associated with OBDII code B1030?

Yes, there are safety concerns associated with OBDII code B1030, as it indicates a potential problem with the airbag system, which is a critical safety feature in a vehicle.

7. Can OBDII code B1030 be triggered by a loose connection?

Yes, OBDII code B1030 can be triggered by a loose or poor connection in the diagnosis sensor unit or related wiring, leading to an intermittent fault.

8. Is it necessary to reset the OBDII code B1030 after repairing the issue?

Yes, it is recommended to reset the OBDII code B1030 after repairing the underlying issue to clear the fault code from the system and ensure proper functionality of the airbag system.

9. How long does it typically take to repair OBDII code B1030?

The time it takes to repair OBDII code B1030 can vary depending on the specific cause of the issue and the complexity of the repair, but it usually takes a few hours to complete the repair.

10. Can OBDII code B1030 reappear after being cleared?

Yes, OBDII code B1030 can reappear if the underlying issue has not been properly addressed or if there are ongoing problems with the diagnosis sensor unit or airbag system.