B1017 BUICK Code - Output Driver Module Performance
|B1017 BUICK code possible causes
- Faulty Driver Door Unlock Relay
- Driver Door Unlock Relay harness is open or shorted
- Driver Door Unlock Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
|How is the B1017 BUICK code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B1017 BUICK code
Labor: 1.0The cost to diagnose the B1017 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1017 BUICK code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B1017 BUICK code meaning?The Body Control Module (BCM) internally grounds the driver door unlock relay control circuit for the driver door unlock relay when it receives an unlock switch signal from either door lock switch. When the BCM grounds the driver door unlock relay control circuit the driver door unlock relay is energized and unlocks the driver door. The Diagnostic Trouble Code (DTC) will set if the driver door unlock relay control circuit is shorted to ground or open for more then one second.
|Need more information with the B1017 BUICK code?Need more information on how to fix the B1017 BUICK code?
Get Access to Factory Service Manuals