B1011 Code - System Disabled Information Stored Driver Assistance Systems
Quick Answer
The B1011 diagnostic code indicates that there is system disabled information stored in the driver assistance systems of the vehicle. Common causes include Faulty sensors or cameras used by driver assistance systems, Wiring issues or loose connections affecting the systems, Software glitches or malfunctions within the driver assistance modules. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1011 indicates System Disabled Information Stored Driver Assistance Systems.
- Common causes
- Common causes include Faulty sensors or cameras used by driver assistance systems, Wiring issues or loose connections affecting the systems, Software glitches or malfunctions within the driver assistance modules.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1011 Description
The B1011 diagnostic code indicates that there is system disabled information stored in the driver assistance systems of the vehicle. This code typically relates to issues with features such as lane departure warning, adaptive cruise control, parking assist, or collision avoidance systems. When this code is present, it means that one or more of these driver assistance systems may not be functioning properly, leading to a potential decrease in safety and convenience while driving.
Common Causes of B1011
- Faulty sensors or cameras used by driver assistance systems
- Wiring issues or loose connections affecting the systems
- Software glitches or malfunctions within the driver assistance modules
- Physical damage to components like sensors or control modules
- Electrical issues such as a low battery voltage affecting the systems
Symptoms of B1011
- Warning lights on the dashboard related to driver assistance systems
- Loss of functionality in features like lane keep assist or adaptive cruise control
- Unresponsive or erratic behavior from driver assistance systems
- Increased difficulty in parking or maintaining a safe distance from other vehicles
- Reduced overall safety while driving, especially in situations where driver assistance systems are relied upon
How to Fix B1011
- Begin by using a diagnostic scanner to retrieve the specific codes stored in the driver assistance systems.
- Inspect all sensors, cameras, and wiring associated with the affected systems for any visible damage or loose connections.
- Clear the stored codes and reset the driver assistance systems to see if the issue persists.
- Test drive the vehicle to verify that the driver assistance systems are functioning correctly after the reset.
- If the problem persists, consider replacing faulty components, updating software, or seeking professional assistance for further diagnosis and repair.
Cost to Fix B1011
The cost of repairing a B1011 code related to driver assistance systems can vary depending on the specific cause of the issue and the extent of the repair needed. In general, you can expect to pay anywhere from $100 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can influence the final cost, so it's best to consult with a professional technician for a more accurate estimate based on your vehicle's make and model.
Tech Notes for B1011
Need more information about the B1011 code?
Need more information on how to fix the B1011 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1011 code diagnosed by a professional: Find a repair shop in your area
Code B1011 Information for Specific Makes
- B1011 Buick — System Disabled Information Stored Driver Assistance Systems
- B1011 Cadillac — System Disabled Information Stored Driver Assistance Systems
- B1011 Chevrolet — System Disabled Information Stored Driver Assistance Systems
- B1011 GMC — System Disabled Information Stored Driver Assistance Systems
- B1011 Infiniti — Diagnosis Sensor Unit
- B1011 Nissan — Diagnosis Sensor Unit
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1011 Code
1. What does OBDII code B1011 mean?
The B1011 code indicates that there is a fault in the driver assistance systems, resulting in system disabled information being stored.
2. What are the common symptoms of OBDII code B1011?
Common symptoms of B1011 may include warning lights related to driver assistance systems appearing on the dashboard, loss of certain driver aids, and potential issues with sensors or components related to these systems.
3. What are the possible causes of OBDII code B1011?
Potential causes of B1011 include faulty sensors in the driver assistance systems, damaged wiring or connectors, software glitches, or issues with the control modules responsible for these systems.
4. How serious is OBDII code B1011?
While B1011 may not cause immediate safety concerns, it can impact the functionality of important driver assistance features, reducing the overall safety and convenience of the vehicle.
5. Can I continue driving with OBDII code B1011 present?
It is generally safe to drive with the B1011 code, but it is recommended to have the issue diagnosed and repaired as soon as possible to ensure the proper functioning of driver assistance systems.
6. How is OBDII code B1011 diagnosed?
Diagnosing B1011 typically involves using an OBDII scanner to retrieve the specific fault code, followed by a detailed inspection of the driver assistance system components to identify the root cause of the issue.
7. What are some repair tips for addressing OBDII code B1011?
Repairing B1011 may involve resetting the system, replacing faulty sensors or components, checking and repairing wiring connections, updating software, or reprogramming control modules related to driver assistance systems.
8. Can I reset OBDII code B1011 on my own?
While you can attempt to clear the B1011 code using an OBDII scanner, it is important to address the underlying issue causing the fault to prevent the code from reappearing.
9. How much does it cost to fix OBDII code B1011?
The cost of fixing B1011 can vary depending on the specific cause of the issue, the extent of repairs needed, and whether any components require replacement. It is recommended to consult a professional mechanic for an accurate estimate.
10. How can I prevent OBDII code B1011 from occurring?
To prevent the B1011 code, it is essential to perform regular maintenance on your vehicle, including checking the driver assistance systems for any signs of wear or malfunction and addressing potential issues promptly.
Discuss the causes and fixes for B1011 OBDII Code
Code B1011 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.