B1009 JEEP - Recirculation Switch Request Input Performance Or Incorrect Input
B1009 JEEP Possible Causes
- Faulty Recirculation Switch
- Recirculation Switch harness is open or shorted
- Recirculation Switch circuit poor electrical connection
- Faulty A/C Heater Control
How do I fix code B1009 JEEP?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1009 JEEP code
Labor: 1.0The cost of diagnosing the B1009 JEEP code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1009 JEEP MeaningThe HVAC A/C Heater Control contains various switches and knobs that are used to change the systems operation. There are currently three types of switches used depending on the configuration of the system. Push button momentary switches which are normally open or in the Off position. Multifunction or rotary switches which have several distinct positions and potentiometers which are a rotary variable resistor that is used for a more precise control. An active Diagnostic Trouble Code (DTC) indicates that either a control switch or potentiometer is stuck in an On position or out of a calibrated range. A stored DTC indicates that control switch or potentiometer was stuck On or out of calibration but has since returned to its normal state.
B1009 JEEP More InformationNeed more information on how to fix the B1009 JEEP code?
Get Access to Factory Service Manuals