Engine-Codes.com
Engine-Codes – GMC – B1008 GMC

B1008 GMC Code - Calibration Data Not Programmed

Quick Answer

The B1008 GMC code indicates that the calibration data for a specific component in the vehicle has not been programmed correctly or is missing. Common causes include Programming Error: The calibration data may not have been programmed correctly during a software update or repair, Faulty Sensor: A faulty sensor or module that is responsible for providing calibration data to the system, Electrical Wiring Issues: Problems with the electrical wiring connecting the component to the vehicle's system. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
B1008 GMC indicates Calibration Data Not Programmed.
Common causes
Common causes include Programming Error: The calibration data may not have been programmed correctly during a software update or repair, Faulty Sensor: A faulty sensor or module that is responsible for providing calibration data to the system, Electrical Wiring Issues: Problems with the electrical wiring connecting the component to the vehicle's system.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
What is this?
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B1008 GMC Description

The B1008 GMC code indicates that the calibration data for a specific component in the vehicle has not been programmed correctly or is missing. Calibration data is essential for ensuring that various systems in the vehicle operate within the manufacturer's specified parameters. When this data is not programmed correctly, it can lead to issues with the affected component's performance, potentially impacting the overall functionality of the vehicle.

OBDII Code B1008 GMC - Calibration Data Not Programmed
B1008 GMC Code - Calibration Data Not Programmed

Common Causes of B1008 GMC

  1. Programming Error: The calibration data may not have been programmed correctly during a software update or repair.
  2. Faulty Sensor: A faulty sensor or module that is responsible for providing calibration data to the system.
  3. Electrical Wiring Issues: Problems with the electrical wiring connecting the component to the vehicle's system.
  4. Software Glitch: A software glitch or corruption that has affected the calibration data.

Symptoms of B1008 GMC

  1. Check Engine Light: The most common symptom associated with the B1008 GMC code is the illumination of the check engine light on the vehicle's dashboard.
  2. Reduced Performance: The vehicle may experience reduced performance, such as sluggish acceleration or rough idling.
  3. Poor Fuel Efficiency: Incorrect calibration data can lead to decreased fuel efficiency, causing the vehicle to consume more fuel than usual.
  4. Limp Mode: In some cases, the vehicle may go into a limp mode to protect the engine from further damage, limiting its performance.

How to Fix B1008 GMC

  1. Diagnostic Scan: Use a diagnostic scan tool to retrieve the specific component associated with the B1008 GMC code.
  2. Check Calibration Data: Verify the calibration data for the affected component and ensure it is programmed correctly.
  3. Repair or Replace Component: Repair or replace any faulty sensors, modules, or wiring that may be causing the issue.
  4. Clear Codes: Clear the B1008 GMC code from the vehicle's system and perform a test drive to ensure the issue has been resolved.

Cost to Fix B1008 GMC

The typical repair costs for addressing the B1008 GMC code can vary depending on the specific component affected and the extent of the issue. On average, the repair costs for this issue can range from $100 to $500, including parts and labor. However, it's important to note that the actual costs can be higher or lower based on factors such as the vehicle make and model, the location of the repair shop, and the hourly labor rates. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate for addressing the B1008 GMC code.

What does this mean?

Tech Notes for B1008 GMC

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

Need more information about the B1008 GMC code?

Need more information on how to fix the B1008 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 GMC Code

1. What are the common symptoms of OBDII code B1008 GMC (Calibration Data Not Programmed)?

- Common symptoms include the airbag warning light staying on, the horn not working, and the airbag system potentially not deploying in a collision.

2. What can cause the OBDII code B1008 GMC to trigger?

- This code is typically triggered when the calibration data for the airbag system is not programmed correctly or is missing.

3. How serious is the OBDII code B1008 GMC?

- This code is considered serious as it indicates a potential issue with the airbag system, which is a critical safety feature in a vehicle.

4. Can I still drive my vehicle with the OBDII code B1008 GMC present?

- It is not recommended to drive the vehicle with this code present, as it may indicate a problem with the airbag system's functionality.

5. How can I diagnose and repair the OBDII code B1008 GMC?

- Diagnosis typically involves using a diagnostic scanner to retrieve the code and checking the calibration data for the airbag system. Repair may involve reprogramming the calibration data or replacing components as needed.

6. Is it possible to reset the OBDII code B1008 GMC without fixing the underlying issue?

- Simply resetting the code without addressing the calibration data issue may result in the code reappearing and the airbag system not functioning properly.

7. Can a DIY enthusiast fix the OBDII code B1008 GMC at home?

- While some DIY enthusiasts may be able to address this code themselves, it is recommended to consult a professional or dealership due to the critical nature of the airbag system.

8. How much does it cost to repair the OBDII code B1008 GMC?

- The cost of repair can vary depending on the underlying issue, but it may involve reprogramming the calibration data, which can range from moderate to expensive.

9. Will the OBDII code B1008 GMC cause my vehicle to fail a state inspection?

- It is possible for this code to cause your vehicle to fail an inspection, as it may indicate a safety issue with the airbag system.

10. Are there any recalls related to the OBDII code B1008 GMC?

- It's recommended to check with the manufacturer or a dealership to see if there are any recalls related to this specific OBDII code and your vehicle model.

Discuss the causes and fixes for B1008 GMC OBDII Code

Submit a New Comment

Code B1008 GMC comments

No comments found for this page.