Engine-Codes - Chrysler - B1000 CHRYSLER

B1000 CHRYSLER - A/C Switch Request Input Performance Or Incorrect Operation

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What is this?

B1000 CHRYSLER Possible Causes

  • Faulty A/C Switch
  • A/C Switch harness is open or shorted
  • A/C Switch circuit poor electrical connection
  • Faulty A/C Heater Control

How do I fix code B1000 CHRYSLER

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the B1000 CHRYSLER code

Labor: 1.0

The cost of diagnosing the B1000 CHRYSLER code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B1000 CHRYSLER Meaning

The HVAC A/C Heater Control contains various switches and knobs that are used to change the systems operation. There are currently three types of switches used depending on the configuration of the system. Push button momentary switches which are normally open or in the Off position. Multifunction or rotary switches which have several distinct positions and potentiometers which are a rotary variable resistor that is used for a more precise control. An active Diagnostic Trouble Code (DTC) indicates that either a control switch or potentiometer is stuck in an On position or out of a calibrated range. A stored DTC indicates that control switch or potentiometer was stuck On or out of calibration but has since returned to its normal state.

B1000 CHRYSLER More Information

Need more information on how to fix the B1000 CHRYSLER code?
Get Access to Factory Service Manuals

Need more help?

Get the B1000 Chrysler code diagnosed by a professional: Find a repair shop in your area