B0988 BUICK Code - Vehicle Direction Alert Alarm Warning Camera Calibration Not Learned
|B0988 BUICK code possible causes
- Faulty Direction Alert Alarm Warning (VDAAW) Module
- Direction Alert Alarm Warning (VDAAW) Module harness is open or shorted
- Direction Alert Alarm Warning (VDAAW) Module circuit poor electrical connection
|How is the B0988 BUICK code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B0988 BUICK code
Labor: 1.0The cost to diagnose the B0988 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B0988 BUICK code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B0988 BUICK code meaning?The lane departure warning system is controlled by the Vehicle Direction Alert Alarm Warning (VDAAW) Module mounted on the windshield. Lane departure warning is enabled and disabled through a switch located in the headlamp switch assembly. When enabled, the VDAAW module will illuminate the indicator located in the switch.
When the system is operating and can detect the lane markings, the VDAAW module will request via serial data communications that the Instrument Panel Cluster (IPC) illuminate the green lane departure ready-to-assist indicator. If the VDAAW module detects that the vehicle has crosses a lane marking without the turn signal being used, the module will request that the IPC flash the yellow lane departure warning indicator. An audible warning will also sound three times when the yellow IPC indicator is flashing.
|Need more information with the B0988 BUICK code?Need more information on how to fix the B0988 BUICK code?
Get Access to Factory Service Manuals