B0960 2018 GMC Sierra Code - Parking Assist Rear Sensor Right Middle Circuit
Quick Answer
The B0960 diagnostic trouble code (DTC) for a 2018 GMC Sierra relates to the Parking Assist Rear Sensor Right Middle Circuit. Common causes include Damaged wiring or connectors in the rear sensor circuit, Faulty rear parking sensor, Corrosion or debris affecting the sensor's functionality. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0960 2018 GMC Sierra indicates Parking Assist Rear Sensor Right Middle Circuit.
- Common causes
- Common causes include Damaged wiring or connectors in the rear sensor circuit, Faulty rear parking sensor, Corrosion or debris affecting the sensor's functionality.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0960 2018 GMC Sierra Description
The B0960 diagnostic trouble code (DTC) for a 2018 GMC Sierra relates to the Parking Assist Rear Sensor Right Middle Circuit. This code indicates a malfunction in the circuitry of the rear parking sensor located on the right side in the middle of the vehicle. The parking assist system uses sensors to detect obstacles while parking, providing audible or visual warnings to the driver to prevent collisions. When this specific sensor circuit fails, it can lead to inaccurate readings or a complete failure of the parking assist system.
Common Causes of B0960 2018 GMC Sierra
- Damaged wiring or connectors in the rear sensor circuit.
- Faulty rear parking sensor.
- Corrosion or debris affecting the sensor's functionality.
- Malfunctioning control module responsible for processing sensor data.
Symptoms of B0960 2018 GMC Sierra
- Parking assist system not providing accurate distance warnings.
- Inability to activate the parking assist system.
- Warning light illuminated on the dashboard related to the parking assist system.
- Beeping or alert sounds from the parking assist system even when there are no obstacles detected.
How to Fix B0960 2018 GMC Sierra
- Begin by conducting a visual inspection of the rear parking sensor and its wiring to check for any visible damage or corrosion.
- Use a multimeter to test the continuity of the sensor circuit and check for any shorts or open circuits.
- If the sensor or wiring is found to be faulty, replace the rear parking sensor or repair the damaged wiring as needed.
- Reset the parking assist system and perform a calibration procedure to ensure proper functionality.
- Test the parking assist system to verify that the issue has been resolved and that the sensor is providing accurate readings.
Cost to Fix B0960 2018 GMC Sierra
The typical repair costs for addressing a B0960 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue. Replacement rear parking sensors can range from $50 to $200, while labor costs may range from $100 to $200. Overall, the total repair cost could be between $150 and $400, including parts and labor. It is advisable to consult with a professional mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle. Keep in mind that labor rates can vary, so it's essential to consider local rates when budgeting for this repair.
Tech Notes for B0960 2018 GMC Sierra
B0960:02 Parking Assist Rear Sensor Right Middle Circuit Short to Ground
B0960:04 Parking Assist Rear Sensor Right Middle Circuit Open
B0960:06 Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
B0960:08 Parking Assist Rear Sensor Right Middle Circuit Performance - Signal Invalid
B0960:18 Parking Assist Rear Sensor Right Middle Circuit Low Signal Amplitude
B0960:21 Parking Assist Rear Sensor Right Middle Circuit Incorrect Period
B0960:22 Parking Assist Rear Sensor Right Middle Circuit Too Short Low-Time
B0960:3A Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
B0960:3B Parking Assist Rear Sensor Right Middle Circuit Self-Test Malfunction
Need more information about the B0960 2018 GMC Sierra code?
Need more information on how to fix the B0960 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0960 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0960 2018 GMC Sierra Code
1. What does the OBDII code B0960 mean for a 2018 GMC Sierra?
The B0960 code indicates an issue with the Parking Assist Rear Sensor Right Middle Circuit, typically caused by a malfunctioning sensor or wiring problem.
2. What are the symptoms of a B0960 code on a 2018 GMC Sierra?
Symptoms include a non-functional parking assist system, warning messages on the dashboard, and possibly audible alerts indicating a fault.
3. What causes the B0960 code on a GMC Sierra?
Common causes include a faulty right middle parking assist sensor, damaged wiring or connectors, or corrosion in the circuit.
4. How do I diagnose the B0960 code on my 2018 GMC Sierra?
Start by inspecting the parking sensor and its wiring for damage or corrosion, then use an OBDII scanner to confirm the fault and check for related codes.
5. Can a B0960 code cause other issues in my GMC Sierra?
While it primarily affects the parking assist system, unresolved issues can lead to decreased functionality or further electrical faults if the wiring is damaged.
6. How do I fix the B0960 code on a 2018 GMC Sierra?
Repairs may involve cleaning or replacing the right middle parking sensor, repairing damaged wiring, or addressing connector corrosion.
7. How much does it cost to fix a B0960 code on a GMC Sierra?
Costs can range from $50 to $200 for sensor replacement or wiring repair, depending on the extent of the damage and labor rates.
8. Can I drive my 2018 GMC Sierra with a B0960 code?
Yes, but the parking assist system may not function properly, which could make parking and maneuvering in tight spaces more difficult.
9. How do I prevent the B0960 code from recurring?
Regularly inspect and clean the parking sensors and connectors to prevent corrosion and ensure proper function.
10. Do I need a professional mechanic to fix the B0960 code?
While some DIYers can replace sensors or repair wiring, a professional mechanic is recommended for accurate diagnostics and repairs.
Discuss the causes and fixes for B0960 2018 GMC Sierra OBDII Code
Code B0960 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.