B0960 2014 GMC Sierra Code - Parking Assist Rear Sensor Right Middle Circuit
Quick Answer
The B0960 diagnostic trouble code for a 2014 GMC Sierra specifically refers to an issue with the Parking Assist Rear Sensor Right Middle Circuit. Common causes include Faulty rear parking sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or debris interfering with sensor function. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0960 2014 GMC Sierra indicates Parking Assist Rear Sensor Right Middle Circuit.
- Common causes
- Common causes include Faulty rear parking sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or debris interfering with sensor function.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0960 2014 GMC Sierra Description
The B0960 diagnostic trouble code for a 2014 GMC Sierra specifically refers to an issue with the Parking Assist Rear Sensor Right Middle Circuit. This code indicates that there is a malfunction in the circuitry of the rear parking sensor located on the right side in the middle of the vehicle. The parking assist system is designed to help drivers navigate tight spaces by alerting them to obstacles behind the vehicle. When this sensor circuit is compromised, it can lead to inaccurate or non-functioning parking assistance, potentially increasing the risk of accidents while reversing.
Common Causes of B0960 2014 GMC Sierra
- Faulty rear parking sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or debris interfering with sensor function
- Electronic control module (ECM) issues affecting sensor communication
- Impact or physical damage to the sensor or surrounding area
Symptoms of B0960 2014 GMC Sierra
- Parking assist system not working or providing inaccurate readings
- Warning lights or messages on the dashboard related to parking assist
- Difficulty in parking or reversing due to lack of sensor feedback
- Audible beeping sounds not activating when approaching obstacles
- Rear bumper damage due to lack of sensor assistance
How to Fix B0960 2014 GMC Sierra
- Start by visually inspecting the rear parking sensor, wiring, and connectors for any visible damage or corrosion.
- Use a multimeter to test the continuity of the sensor circuit and check for any shorts or open circuits.
- If the sensor is found to be faulty, replace it with a new OEM part from the manufacturer.
- Clear the diagnostic trouble code from the vehicle's system using an OBD-II scanner.
- Test the parking assist system to ensure proper functionality and calibration after the repair.
Cost to Fix B0960 2014 GMC Sierra
The typical repair costs for addressing a B0960 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue and the labor rates in your area. In general, you can expect to pay anywhere from $150 to $300 for parts and labor. It's essential to consider the diagnostic time and labor rates at different auto repair shops, as well as the cost of the replacement sensor if needed. Be sure to obtain quotes from multiple sources to get the most accurate estimate for your particular situation.
Tech Notes for B0960 2014 GMC Sierra
B0960:02 Parking Assist Rear Sensor Right Middle Circuit Short to Ground
B0960:04 Parking Assist Rear Sensor Right Middle Circuit Open
B0960:06 Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
B0960:08 Parking Assist Rear Sensor Right Middle Circuit Performance - Signal Invalid
B0960:18 Parking Assist Rear Sensor Right Middle Circuit Low Signal Amplitude
B0960:21 Parking Assist Rear Sensor Right Middle Circuit Incorrect Period
B0960:22 Parking Assist Rear Sensor Right Middle Circuit Too Short Low-Time
B0960:3A Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
B0960:3B Parking Assist Rear Sensor Right Middle Circuit Self-Test Malfunction
Need more information about the B0960 2014 GMC Sierra code?
Need more information on how to fix the B0960 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0960 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0960 2014 GMC Sierra Code
What does the OBDII code B0960 mean for a 2014 GMC Sierra?
The B0960 code indicates a fault in the parking assist rear sensor right middle circuit, which may affect the vehicle's ability to detect obstacles behind it.
What are the common symptoms associated with the B0960 code?
Common symptoms include malfunctioning rear parking sensors, warning lights on the dashboard, and issues with the parking assist system not activating.
What could cause the B0960 code to trigger in a 2014 GMC Sierra?
Causes may include a faulty parking sensor, damaged wiring or connectors, or issues with the parking assist control module.
How can I diagnose the B0960 code in my GMC Sierra?
Start by visually inspecting the wiring and connectors associated with the right middle rear parking sensor. Use a multimeter to check for continuity and verify the sensor's operation.
Is it safe to drive with the B0960 code present?
While it may be safe to drive, the parking assist system will not function properly, which could increase the risk of accidents while reversing.
What repairs are typically needed to fix the B0960 code?
Repairs may involve replacing the faulty parking sensor, repairing damaged wiring, or reprogramming or replacing the parking assist control module.
Can I clear the B0960 code without fixing the issue?
Yes, you can clear the code using an OBDII scanner, but the underlying issue will likely cause the code to reappear.
How much does it typically cost to repair the B0960 code?
Repair costs can vary widely depending on the cause, but replacing a parking sensor may cost between $100 to $300, including parts and labor.
Are there any DIY tips for fixing the B0960 code?
Inspect the wiring and connectors for damage, clean any corrosion, and ensure the sensor is properly mounted. If the sensor is faulty, replacing it is usually straightforward.
What should I do if the B0960 code keeps coming back after repairs?
If the code persists, it may be necessary to perform a deeper diagnostic to check for issues with the parking assist control module or other related components.
Discuss the causes and fixes for B0960 2014 GMC Sierra OBDII Code
Code B0960 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.