B0960:06 Code - Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
Quick Answer
The B0960:06 diagnostic trouble code (DTC) indicates a problem with the Parking Assist Rear Sensor Right Middle Circuit in a vehicle. Common causes include Damaged wiring or connectors in the parking sensor circuit, Faulty parking sensor in the right middle position, Malfunctioning control module for the parking assist system. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0960:06 indicates Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open.
- Common causes
- Common causes include Damaged wiring or connectors in the parking sensor circuit, Faulty parking sensor in the right middle position, Malfunctioning control module for the parking assist system.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0960:06 Description
The B0960:06 diagnostic trouble code (DTC) indicates a problem with the Parking Assist Rear Sensor Right Middle Circuit in a vehicle. This code specifically points to a low voltage or open circuit issue with the sensor located on the right side in the middle of the rear bumper. The parking assist system uses sensors to detect objects behind the vehicle while parking, providing audible or visual alerts to the driver to prevent collisions. When this sensor's circuit is experiencing low voltage or is open, it can lead to inaccurate readings or a complete failure of the parking assist system.
Common Causes of B0960:06
- Damaged wiring or connectors in the parking sensor circuit.
- Faulty parking sensor in the right middle position.
- Malfunctioning control module for the parking assist system.
- Water or debris intrusion affecting the sensor's operation.
- Corrosion on the sensor or wiring connections.
Symptoms of B0960:06
- Parking assist system not providing alerts when objects are detected.
- Inaccurate or inconsistent readings from the parking sensors.
- Parking assist system error message displayed on the dashboard.
- Difficulty in parking due to lack of sensor assistance.
How to Fix B0960:06
- Begin by visually inspecting the wiring and connectors related to the right middle parking sensor for any signs of damage or corrosion.
- Test the parking sensor itself using a multimeter to check for proper voltage and continuity.
- If the sensor is faulty, replace it with a new one and ensure proper calibration.
- Check the control module for any error codes and reset if necessary.
- Clear the DTC from the vehicle's computer system using a diagnostic scanner.
Cost to Fix B0960:06
The typical repair costs for addressing a B0960:06 code can vary depending on the specific cause of the issue. In general, replacing a parking sensor or repairing wiring/connectors may cost between $150 to $300, including parts and labor. However, if the control module needs to be replaced, the cost could be higher, potentially ranging from $300 to $600. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your vehicle make and model.
Tech Notes for B0960:06
B0960:02 Parking Assist Rear Sensor Right Middle Circuit Short to Ground
B0960:04 Parking Assist Rear Sensor Right Middle Circuit Open
B0960:06 Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
B0960:08 Parking Assist Rear Sensor Right Middle Circuit Performance - Signal Invalid
B0960:18 Parking Assist Rear Sensor Right Middle Circuit Low Signal Amplitude
B0960:21 Parking Assist Rear Sensor Right Middle Circuit Incorrect Period
B0960:22 Parking Assist Rear Sensor Right Middle Circuit Too Short Low-Time
B0960:3A Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
B0960:3B Parking Assist Rear Sensor Right Middle Circuit Self-Test Malfunction
Need more information about the B0960:06 code?
Need more information on how to fix the B0960:06 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0960:06 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0960:06 Code
What does OBDII code B0960:06 mean?
Code B0960:06 indicates a low voltage or open circuit issue in the Parking Assist Rear Sensor Right Middle, which may impact the operation of the parking assist system.
What are the common symptoms of code B0960:06?
Typical symptoms include the parking assist system not functioning properly, warning lights on the dashboard, or audible alerts indicating a sensor fault.
What causes the B0960:06 code to appear?
Common causes include a faulty parking sensor, damaged wiring or connectors, a corroded sensor connection, or an issue with the parking assist module.
Can I still drive my vehicle with the B0960:06 code?
Yes, you can still drive, but the parking assist system may not work properly, increasing the risk of collisions when reversing.
How can I diagnose the issue causing code B0960:06?
Start by inspecting the sensor and its wiring for visible damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.
Can I fix the B0960:06 code issue myself?
If the issue is minor, like a loose connection or corroded terminal, you may be able to fix it yourself. For more complex problems, professional help is recommended.
How much does it cost to repair code B0960:06?
Repair costs vary depending on the issue. Replacing a parking sensor can cost $50–$200, while addressing wiring or module issues might cost more.
Will clearing the code fix the problem?
Clearing the code may temporarily remove the warning, but it won’t resolve the underlying issue causing the fault.
How can I prevent the B0960:06 code from recurring?
Regularly inspect and clean the parking sensors and connectors to prevent dirt, corrosion, or physical damage.
Do I need to replace the parking sensor for code B0960:06?
Not always. First, rule out wiring or connector issues. If the sensor is confirmed faulty, replacement may be necessary.
Discuss the causes and fixes for B0960:06 OBDII Code
Code B0960:06 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.