B094E GMC Code - Right Side Object Detection Indicator Circuit
|B094E GMC code possible causes
- Faulty Right Side Object Detection Indicator
- Right Side Object Detection Indicator harness is open or shorted
- Right Side Object Detection Indicator circuit poor electrical connection
|How is the B094E GMC code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|B094E GMC code tech notesB094E 01 Right Side Object Detection Indicator Circuit Short to Battery
B094E 02 Right Side Object Detection Indicator Circuit Short to Ground
|What is the cost to diagnose the B094E GMC code
Labor: 1.0The cost to diagnose the B094E GMC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B094E GMC code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B094E GMC code meaning?The side blind zone alert system sensors are located behind the rear fascia and detect and report objects on either side of the vehicle, within a specified blind zone. The system alerts with a visual indicator placed on each side rear view mirror, to the presence of objects that may not be visible in the inside rearview mirror and outside rearview mirrors. When the system detects a vehicle in the side blind zone while driving forward, independent if passing a vehicle or being passed, the Left or Right Side Object Sensor will send a signal via serial data to the appropriate Door Lock/Window Switch. The Door Lock/Window switch supplies power and ground to the outside rearview mirror. When commanded via serial data, the Door Lock/window switch will provide voltage to the outside rear view mirror. The amber warning symbol will light up in the appropriate outside mirror. This indicates that it may be unsafe to change lanes. If the driver then activates the turn signal, the amber warning symbol starts flashing as an extra warning not to change lanes.
Side blind zone alert is active from speeds of 10 km/h (6.2 MPH) up to 140 km/h (87 MPH). Driving faster deactivates the system, indicated by low lighting warning symbols in the mirrors. Driving under this speed again will turn off the warning symbols. If then a vehicle is detected in blind zone, the warning symbols will illuminate normally on the appropriate side. When the vehicle is started, both outside mirror displays will briefly come on to indicate that the system is operating.
|Need more information with the B094E GMC code?Need more information on how to fix the B094E GMC code?
Get Access to Factory Service Manuals