B094E CHEVROLET - Right Side Object Detection Indicator Circuit
B094E CHEVROLET Possible Causes
- Faulty Right Side Object Detection Indicator
- Right Side Object Detection Indicator harness is open or shorted
- Right Side Object Detection Indicator circuit poor electrical connection
First diagnose B094E CHEVROLET code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
B094E CHEVROLET Tech NotesB094E 01 Right Side Object Detection Indicator Circuit Short to Battery
B094E 02 Right Side Object Detection Indicator Circuit Short to Ground
Cost of diagnosing the B094E CHEVROLET code
Labor: 1.0The cost of diagnosing the B094E CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B094E CHEVROLET Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B094E CHEVROLET MeaningThe side blind zone alert system sensors are located behind the rear fascia and detect and report objects on either side of the vehicle, within a specified blind zone. The system alerts with a visual indicator placed on each side rear view mirror, to the presence of objects that may not be visible in the inside rearview mirror and outside rearview mirrors. When the system detects a vehicle in the side blind zone while driving forward, independent if passing a vehicle or being passed, the Left or Right Side Object Sensor will send a signal via serial data to the appropriate Door Lock/Window Switch. The Door Lock/Window switch supplies power and ground to the outside rearview mirror. When commanded via serial data, the Door Lock/window switch will provide voltage to the outside rear view mirror. The amber warning symbol will light up in the appropriate outside mirror. This indicates that it may be unsafe to change lanes. If the driver then activates the turn signal, the amber warning symbol starts flashing as an extra warning not to change lanes.
Side blind zone alert is active from speeds of 10 km/h (6.2 MPH) up to 140 km/h (87 MPH). Driving faster deactivates the system, indicated by low lighting warning symbols in the mirrors. Driving under this speed again will turn off the warning symbols. If then a vehicle is detected in blind zone, the warning symbols will illuminate normally on the appropriate side. When the vehicle is started, both outside mirror displays will briefly come on to indicate that the system is operating.
B094E CHEVROLET More InformationNeed more information on how to fix the B094E CHEVROLET code?
Get Access to Factory Service Manuals