B0790 2014 GMC Sierra Code - Transfer Case Neutral Indicator Circuit
Quick Answer
The B0790 code for a 2014 GMC Sierra refers to an issue with the Transfer Case Neutral Indicator Circuit. Common causes include Faulty transfer case neutral indicator switch, Damaged or corroded wiring in the indicator circuit, Loose or disconnected electrical connections in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0790 2014 GMC Sierra indicates Transfer Case Neutral Indicator Circuit.
- Common causes
- Common causes include Faulty transfer case neutral indicator switch, Damaged or corroded wiring in the indicator circuit, Loose or disconnected electrical connections in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0790 2014 GMC Sierra Description
The B0790 code for a 2014 GMC Sierra refers to an issue with the Transfer Case Neutral Indicator Circuit. The transfer case is a critical component of a four-wheel-drive or all-wheel-drive system in a vehicle, responsible for transferring power from the transmission to the front and rear axles. The neutral indicator circuit is a part of the transfer case system that communicates the current status of the transfer case to the driver through the dashboard indicator lights.
Common Causes of B0790 2014 GMC Sierra
- Faulty transfer case neutral indicator switch
- Damaged or corroded wiring in the indicator circuit
- Loose or disconnected electrical connections in the circuit
- Internal transfer case issues affecting the indicator system
- Electronic control module (ECM) failure or malfunction
Symptoms of B0790 2014 GMC Sierra
- Incorrect or absent neutral indicator on the dashboard
- Difficulty shifting between two-wheel-drive and four-wheel-drive modes
- Unusual noises or vibrations from the transfer case
- Reduced traction or drivability in certain conditions
- Dashboard warning lights related to the transfer case system
How to Fix B0790 2014 GMC Sierra
- Begin by conducting a thorough diagnostic scan to confirm the B0790 code and pinpoint the exact cause of the issue.
- Inspect the transfer case neutral indicator switch and wiring for any signs of damage, corrosion, or disconnection.
- Test the electrical connections in the circuit to ensure they are secure and functioning correctly.
- If necessary, replace the faulty neutral indicator switch or repair any damaged wiring or connections.
- Clear the diagnostic trouble codes, reset the system, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix B0790 2014 GMC Sierra
The cost of repairing the Transfer Case Neutral Indicator Circuit issue can vary depending on the specific cause of the problem and the labor rates in your area. Typically, the parts required for this repair, such as a new neutral indicator switch or wiring components, may range from $50 to $200. Labor costs can add another $100 to $300 to the total repair bill. Overall, you can expect to pay anywhere from $150 to $500 for this repair, but it's advisable to consult with a trusted mechanic or repair shop for a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary, so it's essential to inquire about the specific charges before proceeding with the repair.
Need more information about the B0790 2014 GMC Sierra code?
Need more information on how to fix the B0790 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0790 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0790 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code B0790 in a 2014 GMC Sierra related to the Transfer Case Neutral Indicator Circuit?
- The common symptoms include the transfer case neutral indicator not working properly or displaying incorrect information on the dashboard.
2. What are the possible causes of OBDII code B0790 in a 2014 GMC Sierra?
- The possible causes can range from a faulty transfer case control module, damaged wiring or connectors, to a malfunctioning transfer case position sensor.
3. How can I diagnose the issue causing OBDII code B0790 in my 2014 GMC Sierra?
- To diagnose the issue, you can use a diagnostic scanner to read the code and perform a visual inspection of the transfer case wiring and connectors. Testing the transfer case position sensor may also be necessary.
4. Can I still drive my 2014 GMC Sierra with OBDII code B0790?
- It is not recommended to drive your vehicle with this code present, as it can lead to potential safety issues or further damage to the transfer case system.
5. How do I repair OBDII code B0790 in my 2014 GMC Sierra?
- Repairing this code typically involves fixing the underlying issue causing the malfunction, such as replacing a faulty transfer case control module, repairing damaged wiring, or replacing the transfer case position sensor.
6. Is it possible to reset OBDII code B0790 in a 2014 GMC Sierra without repairing the issue?
- While you can clear the code using a diagnostic scanner, it is crucial to address the root cause of the problem to prevent the code from reappearing.
7. Can a DIY enthusiast fix OBDII code B0790 in a 2014 GMC Sierra?
- Depending on your mechanical skills and access to tools, some DIY enthusiasts may be able to diagnose and repair this code. However, complex issues may require professional intervention.
8. How much does it typically cost to repair OBDII code B0790 in a 2014 GMC Sierra?
- The cost of repair can vary based on the specific cause of the issue. On average, repairs related to this code can range from $200 to $800, including parts and labor.
9. Are there any preventive maintenance tips to avoid OBDII code B0790 in a 2014 GMC Sierra?
- Regularly inspecting and maintaining the transfer case system, including checking for any signs of wear or damage, can help prevent issues that may trigger this code.
10. Will OBDII code B0790 cause my 2014 GMC Sierra to fail an emissions test?
- If left unresolved, this code can potentially lead to a failed emissions test due to its impact on the transfer case system. It's essential to address the issue promptly to ensure your vehicle meets emissions standards.
Discuss the causes and fixes for B0790 2014 GMC Sierra OBDII Code
Code B0790 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.