Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the B0785 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The Two Wheel Drive (2WD) High Range (HI) indicator circuit consists of a Light Emitting Diode (LED) feed circuit, an LED, and an LED control circuit. The indicator dimming control circuit is the LED feed circuit and continuously supplies B+ to the 2WD HI, 4WD Auto, 4WD HI, and 4WD LO LEDs. When the 2WD HI mode has been selected by the driver, the Transfer Case Shift Control Module (TCCM) provides a ground through the 2WD HI indicator control circuit illuminating the LED.
The TCCM tests the 2WD HI indicator circuit for unexpected voltage by monitoring the B+ supplied by the BCM on the indicator dimming control circuit by grounding the 2WD HI indicator control circuit for 2 seconds during the Bulb Test at key ON.
Need more information on how to fix the B0785 code? Get Access to Factory Service Manuals
Get the B0785 code diagnosed by a professional: Find a repair shop in your area