B0680 2014 Chevrolet Silverado Code - Passenger Air Bag Off Indicator Circuit
Quick Answer
The B0680 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to the Passenger Air Bag Off Indicator Circuit. Common causes include Faulty wiring or connectors in the circuit, Malfunctioning passenger presence sensor, Defective airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0680 2014 Chevrolet Silverado indicates Passenger Air Bag Off Indicator Circuit.
- Common causes
- Common causes include Faulty wiring or connectors in the circuit, Malfunctioning passenger presence sensor, Defective airbag control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0680 2014 Chevrolet Silverado Description
The B0680 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to the Passenger Air Bag Off Indicator Circuit. This code indicates that there is a malfunction in the circuit responsible for the passenger airbag off indicator light. The passenger airbag off indicator light is designed to inform the driver when the passenger airbag is deactivated, typically when there is no passenger in the seat or if the passenger is below a certain weight threshold.
Common Causes of B0680 2014 Chevrolet Silverado
- Faulty wiring or connectors in the circuit.
- Malfunctioning passenger presence sensor.
- Defective airbag control module.
- Issues with the indicator light itself.
- Corrosion or damage to components in the circuit.
Symptoms of B0680 2014 Chevrolet Silverado
- Passenger airbag off indicator light stays on when there is a passenger in the seat.
- Passenger airbag off indicator light fails to illuminate when the seat is empty.
- Airbag warning light on the dashboard may illuminate.
- Inconsistent behavior of the passenger airbag system.
How to Fix B0680 2014 Chevrolet Silverado
- Begin by conducting a thorough inspection of the wiring and connectors in the passenger airbag off indicator circuit.
- Test the passenger presence sensor to determine if it is functioning correctly.
- Check the airbag control module for any faults or errors.
- Inspect the indicator light and replace if necessary.
- Clear the DTC and reset the airbag system to ensure proper functionality.
Cost to Fix B0680 2014 Chevrolet Silverado
The cost of repairing a B0680 code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. On average, the parts for this repair may range from $100 to $300, while labor costs can add an additional $100 to $200. Overall, the total repair cost could be between $200 and $500. It is important to note that these are rough estimates, and actual costs may differ based on the location, labor rates, and any additional repairs or parts needed. It is recommended to consult with a certified mechanic or dealership for a more accurate cost estimate.
Tech Notes for B0680 2014 Chevrolet Silverado
B0680:02 Passenger Air Bag Off Indicator Circuit Short to Ground
B0680:04 Passenger Air Bag Off Indicator Circuit Open
B0680:05 Passenger Air Bag Off Indicator Circuit High Voltage/Open
Need more information about the B0680 2014 Chevrolet Silverado code?
Need more information on how to fix the B0680 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0680 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0680 2014 Chevrolet Silverado Code
1. What does the OBDII code B0680 for a 2014 Chevrolet Silverado mean?
The code B0680 indicates a problem with the Passenger Air Bag Off Indicator Circuit in a 2014 Chevrolet Silverado.
2. What are the common symptoms of a Passenger Air Bag Off Indicator Circuit issue?
Common symptoms include the passenger airbag off light staying illuminated or not working properly in the 2014 Chevrolet Silverado.
3. What are the possible causes of the B0680 code in a 2014 Chevrolet Silverado?
Potential causes of the B0680 code include a faulty passenger air bag off indicator switch, wiring issues, or a malfunctioning air bag control module.
4. How can I diagnose the Passenger Air Bag Off Indicator Circuit problem in my 2014 Chevrolet Silverado?
Diagnosing the issue may involve checking the indicator switch, inspecting the wiring for damage, and using a scan tool to retrieve specific fault codes related to the airbag system.
5. Can I still drive my 2014 Chevrolet Silverado with the B0680 code?
It is not recommended to drive the vehicle with an active airbag system fault code like B0680, as it may affect the proper deployment of the passenger airbag in case of an accident.
6. How can I reset the B0680 code in my 2014 Chevrolet Silverado?
Resetting the B0680 code may require fixing the underlying issue first, then using an OBDII scanner to clear the stored fault code from the vehicle's computer.
7. Is it safe to repair the Passenger Air Bag Off Indicator Circuit issue myself?
Due to the critical nature of the airbag system, it is recommended to have the B0680 code diagnosed and repaired by a qualified mechanic or dealership to ensure proper function and safety.
8. How much does it typically cost to repair a B0680 code in a 2014 Chevrolet Silverado?
The cost of repairing the Passenger Air Bag Off Indicator Circuit issue can vary depending on the exact cause of the problem, but it may involve parts replacement and labor costs.
9. Are there any recalls or technical service bulletins related to the B0680 OBDII code in the 2014 Chevrolet Silverado?
It is advisable to check with a Chevrolet dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any relevant recalls or bulletins related to the B0680 code.
10. What precautions should I take if the Passenger Air Bag Off Indicator Circuit is malfunctioning in my 2014 Chevrolet Silverado?
If you suspect an issue with the airbag system, it is important to have it inspected and repaired promptly to ensure the safety of occupants in the event of a collision.
Discuss the causes and fixes for B0680 2014 Chevrolet Silverado OBDII Code
Code B0680 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.