B067F:04 Code - Passenger Air Bag On Indicator Circuit Open
Quick Answer
The B067F:04 diagnostic trouble code (DTC) indicates that there is an open circuit in the passenger airbag on indicator system. Common causes include Faulty passenger airbag on indicator light, Damaged wiring harness leading to the indicator light, Loose or corroded electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067F:04 indicates Passenger Air Bag On Indicator Circuit Open.
- Common causes
- Common causes include Faulty passenger airbag on indicator light, Damaged wiring harness leading to the indicator light, Loose or corroded electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B067F:04 Description
The B067F:04 diagnostic trouble code (DTC) indicates that there is an open circuit in the passenger airbag on indicator system. This means that the circuit that controls the passenger airbag status indicator light is not functioning properly, potentially leading to the indicator light not illuminating when it should or staying on when it shouldn't. The passenger airbag on indicator is crucial for informing the driver whether the passenger airbag is activated or deactivated, ensuring the safety of the vehicle's occupants.
Common Causes of B067F:04
- Faulty passenger airbag on indicator light.
- Damaged wiring harness leading to the indicator light.
- Loose or corroded electrical connections.
- Malfunctioning sensor responsible for detecting passenger presence.
- Issues with the airbag control module.
Symptoms of B067F:04
- Passenger airbag on indicator light not illuminating.
- Passenger airbag on indicator light staying on constantly.
- Inconsistent behavior of the passenger airbag on indicator light.
- Airbag warning light on the dashboard may illuminate.
How to Fix B067F:04
- Begin by conducting a thorough visual inspection of the indicator light, wiring harness, and connections to identify any visible damage or loose connections.
- Use a multimeter to test the continuity of the circuit and check for any open circuits.
- Replace the passenger airbag on indicator light if it is found to be faulty.
- Repair or replace any damaged wiring harness or connectors.
- Reset the airbag control module and clear the DTC using a diagnostic scan tool.
Cost to Fix B067F:04
The cost of repairing a B067F:04 code can vary depending on the specific cause of the issue and the labor rates in your area. On average, the repair for this type of problem can range from $100 to $300, including parts and labor. Keep in mind that diagnostic time and labor rates can fluctuate, so it's recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Tech Notes for B067F:04
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open
Need more information about the B067F:04 code?
Need more information on how to fix the B067F:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067F:04 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067F:04 Code
1. What does OBDII code B067F:04 mean?
B067F:04 indicates an open circuit in the passenger airbag "ON" indicator, meaning the system cannot properly detect or illuminate the indicator.
2. What are the symptoms of code B067F:04?
Common symptoms include the passenger airbag "ON" indicator not lighting up, intermittent operation of the indicator, or the airbag warning light illuminated on the dashboard.
3. What causes code B067F:04 to appear?
This code is typically caused by a damaged or disconnected wiring harness, a faulty passenger airbag indicator bulb, a defective indicator module, or a poor connection at the related connector.
4. Can I still drive with code B067F:04 active?
Yes, but it’s not recommended. The passenger airbag system may not function as intended, which could compromise safety in the event of a collision.
5. How do I diagnose code B067F:04?
Start by inspecting the wiring and connectors for damage or loose connections. Use a multimeter to check for continuity in the circuit and verify the functionality of the passenger airbag "ON" indicator.
6. What tools are needed to fix code B067F:04?
You’ll typically need a multimeter, a scan tool capable of reading airbag codes, and possibly replacement parts, such as a new indicator bulb or wiring harness.
7. How much does it cost to repair code B067F:04?
Repair costs vary depending on the issue. Fixing a loose connector may be free, while replacing the indicator module or repairing wiring could cost $100-$300 or more.
8. Can a blown fuse cause code B067F:04?
Yes, a blown fuse in the passenger airbag indicator circuit could disrupt power and trigger the code. Check the fuse box and replace any faulty fuses.
9. Will clearing the code fix B067F:04 permanently?
No, clearing the code without addressing the underlying issue will only temporarily remove the code. The problem must be fixed to prevent the code from returning.
10. Can I fix code B067F:04 myself?
If you’re comfortable working with electrical systems, you may be able to fix it yourself by repairing damaged wiring or replacing the indicator bulb. However, for complex issues, professional assistance is recommended.
Discuss the causes and fixes for B067F:04 OBDII Code
Code B067F:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.