B067F:02 Code - Passenger Air Bag On Indicator Circuit Short to Ground
Quick Answer
The B067F:02 diagnostic trouble code (DTC) indicates that there is a short to ground in the circuit responsible for the passenger airbag on indicator. Common causes include Wiring harness damage or wear leading to a short to ground, Faulty passenger airbag on indicator switch, Corrosion or poor connections in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067F:02 indicates Passenger Air Bag On Indicator Circuit Short to Ground.
- Common causes
- Common causes include Wiring harness damage or wear leading to a short to ground, Faulty passenger airbag on indicator switch, Corrosion or poor connections in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B067F:02 Description
The B067F:02 diagnostic trouble code (DTC) indicates that there is a short to ground in the circuit responsible for the passenger airbag on indicator. This means that there is an unintended connection between the circuit carrying the signal for the passenger airbag on indicator and the vehicle's ground, causing a disruption in the proper functioning of the indicator. The passenger airbag on indicator is crucial for informing the driver whether the passenger airbag is activated or deactivated, ensuring the safety of passengers in the event of a collision.
Common Causes of B067F:02
- Wiring harness damage or wear leading to a short to ground.
- Faulty passenger airbag on indicator switch.
- Corrosion or poor connections in the circuit.
- Electrical issues such as a blown fuse or relay affecting the circuit.
- Impact or collision causing damage to the wiring or components.
Symptoms of B067F:02
- Passenger airbag on indicator not illuminating when the airbag is deactivated.
- Passenger airbag on indicator remaining illuminated when the airbag is activated.
- Inconsistent behavior of the passenger airbag on indicator.
- Airbag warning light on the dashboard may be illuminated.
How to Fix B067F:02
- Begin by conducting a visual inspection of the wiring harness and connectors for any signs of damage or wear. Repair or replace any damaged components.
- Use a multimeter to test the continuity of the circuit and identify the location of the short to ground. Repair the shorted section of the circuit.
- Check the passenger airbag on indicator switch for proper functionality and replace if necessary.
- Inspect the fuse and relay related to the passenger airbag system and replace any faulty components.
- Clear the DTC from the vehicle's computer system using a diagnostic scan tool after completing the repairs.
Cost to Fix B067F:02
The cost of repairing a B067F:02 code can vary depending on the extent of the damage, the specific components that need to be replaced, and the labor rates in your area. On average, the repair for this issue may range from $150 to $500, including parts and labor. Keep in mind that diagnostic time and labor rates can vary between different auto repair shops, so it's recommended to obtain quotes from multiple sources to ensure a competitive price. Additionally, factors such as the vehicle make and model, as well as the location of the repair facility, can influence the overall cost of addressing this code.
Tech Notes for B067F:02
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open
Need more information about the B067F:02 code?
Need more information on how to fix the B067F:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067F:02 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067F:02 Code
1. What does the OBDII code B067F:02 mean?
The code B067F:02 indicates a short to ground in the passenger airbag on indicator circuit, which may prevent the indicator from functioning properly.
2. What are the common symptoms of code B067F:02?
Symptoms include the passenger airbag on/off indicator not working, illuminated airbag warning light on the dashboard, and potentially disabled airbag functionality.
3. What causes the B067F:02 code to appear?
This code is often caused by damaged wiring, a short circuit, a faulty passenger airbag indicator, or a malfunctioning airbag control module.
4. Can I still drive my car with code B067F:02 active?
While the car may still be drivable, the airbag system might not function correctly in an accident, compromising passenger safety.
5. How do I diagnose code B067F:02?
Diagnose by inspecting the wiring and connectors for damage or corrosion, testing the passenger airbag indicator for faults, and using a scan tool to verify the issue.
6. How can I fix the B067F:02 code?
Repairs may include repairing or replacing damaged wiring, replacing the faulty passenger airbag indicator, or reprogramming/replacing the airbag control module if necessary.
7. Is the B067F:02 code related to the airbag system?
Yes, it directly relates to the passenger airbag on/off indicator, which is part of the airbag system.
8. How much does it cost to repair the B067F:02 code?
Repair costs vary depending on the issue, but it could range from $50 for minor wiring repairs to $500 or more for replacing components like the airbag control module.
9. Can clearing the code fix the B067F:02 issue?
Clearing the code will not fix the underlying issue. The root cause, such as damaged wiring or a faulty component, must be repaired first.
10. Should I consult a professional mechanic for code B067F:02?
Yes, since the code involves the airbag system, it’s recommended to have a professional diagnose and repair it to ensure passenger safety.
Discuss the causes and fixes for B067F:02 OBDII Code
Code B067F:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.