Engine-CodesChevrolet – B067A 2018 Chevrolet Silverado

B067A 2018 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Quick Answer

The B067A diagnostic trouble code (DTC) for the 2018 Chevrolet Silverado refers to a fault in the Rollover Protection OFF Indicator Circuit. Common causes include Faulty rollover protection system sensor, Wiring or connection issues in the indicator circuit, Malfunctioning control module responsible for the indicator light. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B067A 2018 Chevrolet Silverado indicates Rollover Protection OFF Indicator Circuit.
Common causes
Common causes include Faulty rollover protection system sensor, Wiring or connection issues in the indicator circuit, Malfunctioning control module responsible for the indicator light.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B067A 2018 Chevrolet Silverado Description

The B067A diagnostic trouble code (DTC) for the 2018 Chevrolet Silverado refers to a fault in the Rollover Protection OFF Indicator Circuit. This code indicates that there is a problem with the system that controls the indicator light that alerts the driver when the rollover protection system is deactivated. The rollover protection system is a crucial safety feature that helps prevent the vehicle from rolling over during extreme driving conditions or accidents. When this indicator circuit malfunctions, it can compromise the effectiveness of the rollover protection system and potentially put the occupants at risk.

OBDII Code B067A 2018 Chevrolet Silverado - Rollover Protection OFF Indicator Circuit
B067A 2018 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Common Causes of B067A 2018 Chevrolet Silverado

  1. Faulty rollover protection system sensor.
  2. Wiring or connection issues in the indicator circuit.
  3. Malfunctioning control module responsible for the indicator light.
  4. Corrosion or damage to the components in the indicator circuit.
  5. Software glitches or programming errors in the system.

Symptoms of B067A 2018 Chevrolet Silverado

  1. The Rollover Protection OFF indicator light stays illuminated constantly.
  2. The Rollover Protection OFF indicator light fails to illuminate when the system is deactivated.
  3. The vehicle's stability control system may be affected, leading to poor handling or traction issues.
  4. The vehicle may exhibit abnormal behavior during sharp turns or sudden maneuvers.
  5. The vehicle may fail to meet safety standards during inspections or crash tests.

How to Fix B067A 2018 Chevrolet Silverado

  1. Diagnose the issue using a scan tool to retrieve the specific fault code and pinpoint the source of the problem.
  2. Inspect the wiring and connections in the Rollover Protection OFF Indicator Circuit for any damage or corrosion.
  3. Test the rollover protection system sensors to ensure they are functioning correctly.
  4. Replace any faulty components, such as sensors, control modules, or wiring harnesses, as needed.
  5. Clear the DTC from the vehicle's memory and perform a test drive to verify that the issue has been resolved.

Cost to Fix B067A 2018 Chevrolet Silverado

The cost of repairing the Rollover Protection OFF Indicator Circuit can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. However, it's important to note that the actual cost may be higher or lower based on factors such as the location of the repair shop, the vehicle's make and model, and the complexity of the repair. Additionally, diagnostic time and labor rates at auto repair shops can fluctuate, with hourly rates typically falling between $80 and $150. It's recommended to consult with a professional mechanic or dealership to obtain a more accurate estimate for the repair.

Tech Notes for B067A 2018 Chevrolet Silverado

B067A:01 Rollover Protection OFF Indicator Circuit Short to Battery

B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground

B067A:04 Rollover Protection OFF Indicator Circuit Open

B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open

Need more information about the B067A 2018 Chevrolet Silverado code?

Need more information on how to fix the B067A 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2018 Chevrolet Silverado Code

1. What does OBDII code B067A on a 2018 Chevrolet Silverado mean?

The B067A code indicates a malfunction in the Rollover Protection OFF Indicator Circuit.

2. What are the common symptoms of OBDII code B067A on a 2018 Chevrolet Silverado?

Common symptoms include the Rollover Protection OFF indicator not illuminating when it should or staying on when it shouldn't.

3. What are the potential causes of OBDII code B067A on a 2018 Chevrolet Silverado?

Possible causes include a faulty indicator switch, wiring issues, a defective indicator cluster, or a problem with the vehicle's computer system.

4. How serious is OBDII code B067A on a 2018 Chevrolet Silverado?

While this code may not affect the vehicle's drivability, it is important to address it promptly as it relates to the vehicle's safety features.

5. Can I continue driving my 2018 Chevrolet Silverado with the Rollover Protection OFF Indicator Circuit issue?

It is recommended to have the issue diagnosed and repaired as soon as possible to ensure the proper functioning of safety features in your vehicle.

6. How can I diagnose OBDII code B067A on a 2018 Chevrolet Silverado?

Diagnosis typically involves using a scan tool to retrieve the trouble code and then inspecting the indicator circuit components for any visible damage or issues.

7. How can I repair OBDII code B067A on a 2018 Chevrolet Silverado?

Repair methods may include replacing the faulty indicator switch, repairing damaged wiring, or addressing any issues with the indicator cluster or vehicle's computer system.

8. Can I reset OBDII code B067A on a 2018 Chevrolet Silverado with a simple reset tool?

While you can attempt to clear the code with a reset tool, it is important to address the underlying issue causing the code for a proper repair.

9. Will OBDII code B067A on a 2018 Chevrolet Silverado cause a check engine light to illuminate?

The B067A code may not always trigger the check engine light, so it's essential to use an OBDII scanner to retrieve and address the specific trouble code.

10. Is it recommended to seek professional help for OBDII code B067A on a 2018 Chevrolet Silverado?

For proper diagnosis and repair of the Rollover Protection OFF Indicator Circuit issue, it is advisable to consult a qualified mechanic or dealership familiar with Chevrolet vehicles.

Discuss the causes and fixes for B067A 2018 Chevrolet Silverado OBDII Code

Code B067A 2018 Chevrolet Silverado comments

No comments found for this page.