Engine-CodesChevrolet – B067A 2016 Chevrolet Silverado

B067A 2016 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Quick Answer

The B067A diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado refers to the Rollover Protection OFF Indicator Circuit. Common causes include Faulty rollover protection system module, Damaged wiring or connectors in the indicator circuit, Corrosion or poor connections in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B067A 2016 Chevrolet Silverado indicates Rollover Protection OFF Indicator Circuit.
Common causes
Common causes include Faulty rollover protection system module, Damaged wiring or connectors in the indicator circuit, Corrosion or poor connections in the circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B067A 2016 Chevrolet Silverado Description

The B067A diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado refers to the Rollover Protection OFF Indicator Circuit. This code indicates a problem with the circuit that controls the rollover protection system in the vehicle. The rollover protection system is designed to deploy safety measures, such as airbags or seatbelt tensioners, in the event of a potential rollover accident. When this code is triggered, it means that the system may not function properly, putting the vehicle occupants at risk in the event of a rollover.

OBDII Code B067A 2016 Chevrolet Silverado - Rollover Protection OFF Indicator Circuit
B067A 2016 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Common Causes of B067A 2016 Chevrolet Silverado

  1. Faulty rollover protection system module.
  2. Damaged wiring or connectors in the indicator circuit.
  3. Corrosion or poor connections in the circuit.
  4. Software issues in the vehicle's control module.
  5. Impact or damage to the vehicle that affected the rollover protection system.

Symptoms of B067A 2016 Chevrolet Silverado

  1. Malfunctioning or non-illuminating Rollover Protection OFF indicator light on the dashboard.
  2. Warning message on the instrument cluster related to the rollover protection system.
  3. Inability to activate or deactivate the rollover protection system.
  4. Unexpected deployment of the rollover protection system during normal driving conditions.

How to Fix B067A 2016 Chevrolet Silverado

  1. Begin by conducting a thorough visual inspection of the indicator circuit wiring, connectors, and components to check for any visible damage or corrosion.
  2. Use a multimeter to test the continuity of the circuit and ensure that the electrical signals are flowing correctly.
  3. Inspect the rollover protection system module for any signs of damage or malfunction and replace if necessary.
  4. Reset the vehicle's control module and recalibrate the rollover protection system to ensure proper functionality.
  5. Test the system by simulating a rollover scenario to verify that the indicator light functions correctly and the system activates as intended.

Cost to Fix B067A 2016 Chevrolet Silverado

The cost of repairing the Rollover Protection OFF Indicator Circuit issue in a 2016 Chevrolet Silverado can vary depending on the specific cause of the problem and the labor rates in your area. On average, the repair costs for this type of issue can range from $200 to $500, including parts and labor. However, it's important to note that diagnostic time and labor rates at auto repair shops can vary significantly, so it's advisable to get a detailed estimate from a qualified technician before proceeding with the repair. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive prices.

Tech Notes for B067A 2016 Chevrolet Silverado

B067A:01 Rollover Protection OFF Indicator Circuit Short to Battery

B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground

B067A:04 Rollover Protection OFF Indicator Circuit Open

B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open

Need more information about the B067A 2016 Chevrolet Silverado code?

Need more information on how to fix the B067A 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2016 Chevrolet Silverado Code

1. What does OBDII code B067A mean for a 2016 Chevrolet Silverado?

OBDII code B067A on a 2016 Chevrolet Silverado indicates a problem with the Rollover Protection OFF Indicator Circuit.

2. What are the common symptoms of OBDII code B067A in a 2016 Chevrolet Silverado?

Common symptoms of OBDII code B067A may include the rollover protection OFF indicator staying illuminated or flashing on the dashboard.

3. What are the possible causes of OBDII code B067A in a 2016 Chevrolet Silverado?

The possible causes of OBDII code B067A in a 2016 Chevrolet Silverado can include a faulty rollover protection OFF indicator switch, wiring issues, or a malfunctioning control module.

4. How do I diagnose OBDII code B067A in my 2016 Chevrolet Silverado?

To diagnose OBDII code B067A, you may need to perform a thorough inspection of the rollover protection OFF indicator circuit, check the switch's functionality, and test the wiring for any faults.

5. Can I still drive my 2016 Chevrolet Silverado with OBDII code B067A present?

It is generally safe to drive your 2016 Chevrolet Silverado with OBDII code B067A, but it is recommended to have the issue diagnosed and repaired promptly to ensure the proper functioning of the rollover protection system.

6. How can I repair OBDII code B067A in my 2016 Chevrolet Silverado?

Repairing OBDII code B067A in a 2016 Chevrolet Silverado may involve replacing the faulty rollover protection OFF indicator switch, repairing any damaged wiring, or reprogramming the control module.

7. Is it possible to reset OBDII code B067A in a 2016 Chevrolet Silverado without repairs?

While you can clear the OBDII code B067A with an OBDII scanner, it is essential to address the underlying issue causing the code to prevent it from reoccurring.

8. Are there any DIY tips for troubleshooting OBDII code B067A in a 2016 Chevrolet Silverado?

DIY tips for troubleshooting OBDII code B067A may include visually inspecting the indicator switch and wiring for any visible damage, checking for loose connections, and ensuring proper grounding.

9. How much does it typically cost to repair OBDII code B067A in a 2016 Chevrolet Silverado?

The cost of repairing OBDII code B067A in a 2016 Chevrolet Silverado can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

10. Can OBDII code B067A in a 2016 Chevrolet Silverado affect vehicle safety?

OBDII code B067A relating to the rollover protection OFF indicator circuit may not directly impact the safety of driving the vehicle, but addressing the issue is crucial for maintaining the proper functioning of the rollover protection system.

Discuss the causes and fixes for B067A 2016 Chevrolet Silverado OBDII Code

Code B067A 2016 Chevrolet Silverado comments

No comments found for this page.