B067A 2014 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit
Quick Answer
The B067A diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to the Rollover Protection OFF Indicator Circuit. Common causes include Faulty wiring or connections in the rollover protection system circuit, Malfunctioning rollover protection system sensor, Defective rollover protection system control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067A 2014 Chevrolet Silverado indicates Rollover Protection OFF Indicator Circuit.
- Common causes
- Common causes include Faulty wiring or connections in the rollover protection system circuit, Malfunctioning rollover protection system sensor, Defective rollover protection system control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B067A 2014 Chevrolet Silverado Description
The B067A diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado refers to the Rollover Protection OFF Indicator Circuit. This code indicates a malfunction in the circuit responsible for controlling the rollover protection system in the vehicle. The rollover protection system is a safety feature designed to deploy roll bars or other protective measures in the event of a potential rollover accident, helping to protect the occupants of the vehicle.
Common Causes of B067A 2014 Chevrolet Silverado
- Faulty wiring or connections in the rollover protection system circuit.
- Malfunctioning rollover protection system sensor.
- Defective rollover protection system control module.
- Physical damage to components within the rollover protection system.
- Corrosion or water damage affecting the circuitry of the system.
Symptoms of B067A 2014 Chevrolet Silverado
- Illumination of the rollover protection system warning light on the dashboard.
- Inability to activate or deactivate the rollover protection system.
- Faulty readings or erratic behavior of the rollover protection system.
- Diagnostic trouble code B067A stored in the vehicle's computer system.
How to Fix B067A 2014 Chevrolet Silverado
- Begin by conducting a thorough visual inspection of the rollover protection system components, looking for any signs of damage, corrosion, or loose connections.
- Use a diagnostic scan tool to retrieve the specific details of the B067A code and further pinpoint the issue within the circuit.
- Test the rollover protection system sensor and control module for proper functionality, replacing any components that are found to be faulty.
- Repair or replace any damaged wiring or connections within the circuit to ensure proper operation of the rollover protection system.
- Clear the DTC from the vehicle's computer system and test the system to verify that the issue has been resolved.
Cost to Fix B067A 2014 Chevrolet Silverado
The cost of repairing the Rollover Protection OFF Indicator Circuit issue can vary depending on the specific cause of the problem and the extent of the repairs needed. In general, the cost of parts for this repair could range from $100 to $500, with labor costs adding an additional $100 to $300. Overall, the total repair cost for this issue could fall within the range of $200 to $800.
Tech Notes for B067A 2014 Chevrolet Silverado
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open
Need more information about the B067A 2014 Chevrolet Silverado code?
Need more information on how to fix the B067A 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067A 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067A 2014 Chevrolet Silverado Code
1. What does OBDII code B067A on a 2014 Chevrolet Silverado mean?
The B067A code indicates a problem with the Rollover Protection OFF Indicator Circuit in the vehicle.
2. What are the common symptoms of OBDII code B067A in a 2014 Chevrolet Silverado?
Common symptoms include the Rollover Protection OFF indicator light staying illuminated or flashing on the dashboard.
3. What are possible causes of OBDII code B067A in a 2014 Chevrolet Silverado?
Potential causes of this code include a faulty rollover sensor, damaged wiring or connectors in the indicator circuit, or a malfunctioning control module.
4. How serious is OBDII code B067A on a 2014 Chevrolet Silverado?
While the code itself may not affect the vehicle's drivability, it indicates a potential issue with the rollover protection system that could compromise safety in the event of an accident.
5. How can I diagnose OBDII code B067A in my 2014 Chevrolet Silverado?
Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific fault codes, inspecting the rollover sensor and related components, and testing the wiring for continuity and proper voltage.
6. Can I still drive my 2014 Chevrolet Silverado with OBDII code B067A present?
It is generally not recommended to drive the vehicle with this code active, as it may indicate a safety-related issue with the rollover protection system.
7. How can I repair OBDII code B067A on a 2014 Chevrolet Silverado?
Repairing this code may involve replacing a faulty rollover sensor, repairing damaged wiring or connectors, or reprogramming the control module to address the issue.
8. Can I reset OBDII code B067A on my 2014 Chevrolet Silverado without fixing the underlying issue?
While you can clear the code with a diagnostic scanner, it is important to address the root cause of the problem to ensure the proper functioning of the rollover protection system.
9. Is OBDII code B067A covered under warranty for a 2014 Chevrolet Silverado?
The coverage of this code under warranty may vary depending on the specific terms of your vehicle's warranty and the cause of the issue.
10. How much does it cost to fix OBDII code B067A in a 2014 Chevrolet Silverado?
The cost of fixing this code can vary based on the extent of the issue, the required repairs or replacements, and labor costs at a repair shop.
Discuss the causes and fixes for B067A 2014 Chevrolet Silverado OBDII Code
Code B067A 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.