B067A:05 Code - Rollover Protection OFF Indicator Circuit High Voltage/Open
Quick Answer
The B067A:05 diagnostic trouble code (DTC) indicates a problem with the Rollover Protection OFF Indicator Circuit in the vehicle. Common causes include Faulty rollover protection OFF indicator switch, Wiring issues such as a short circuit or open circuit in the indicator circuit, Malfunctioning rollover protection control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067A:05 indicates Rollover Protection OFF Indicator Circuit High Voltage/Open.
- Common causes
- Common causes include Faulty rollover protection OFF indicator switch, Wiring issues such as a short circuit or open circuit in the indicator circuit, Malfunctioning rollover protection control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B067A:05 Description
The B067A:05 diagnostic trouble code (DTC) indicates a problem with the Rollover Protection OFF Indicator Circuit in the vehicle. This code specifically points to a high voltage or open circuit issue, meaning that the system is not receiving the expected electrical signal related to the rollover protection feature. Rollover protection systems are designed to deploy safety measures, such as roll bars or airbags, in the event of a potential rollover accident to protect occupants inside the vehicle.
Common Causes of B067A:05
- Faulty rollover protection OFF indicator switch
- Wiring issues such as a short circuit or open circuit in the indicator circuit
- Malfunctioning rollover protection control module
- Corrosion or damage to electrical connectors related to the system
- Software glitches or programming errors in the system
Symptoms of B067A:05
- Illumination of the rollover protection OFF indicator on the dashboard
- Inability to activate or deactivate the rollover protection system
- Warning messages related to the rollover protection system on the instrument cluster
- Malfunction of other safety features linked to the rollover protection system
How to Fix B067A:05
- Begin by conducting a thorough visual inspection of the rollover protection OFF indicator circuit, looking for any visible damage to wiring, connectors, or components.
- Use a multimeter to test the voltage levels in the circuit and identify any abnormalities that may be causing the high voltage or open circuit issue.
- Check the rollover protection OFF indicator switch for proper functionality and replace it if necessary.
- Inspect the rollover protection control module for any signs of damage or malfunction, and replace it if needed.
- Clear the DTC from the vehicle's computer system using a diagnostic scan tool after completing the repairs and verify that the issue has been resolved by testing the rollover protection system.
Cost to Fix B067A:05
The typical repair costs for addressing a B067A:05 code can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, parts for this repair may range from $50 to $200, while labor costs can add another $100 to $300 to the total bill. Overall, the total repair cost for this issue could fall within the range of $150 to $500. It is important to note that these estimates are rough averages, and actual costs may differ based on factors such as location, vehicle make and model, and the repair shop's labor rates. It is recommended to obtain quotes from local auto repair shops to get a more accurate cost estimate for addressing this particular DTC.
Tech Notes for B067A:05
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open
Need more information about the B067A:05 code?
Need more information on how to fix the B067A:05 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067A:05 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067A:05 Code
1. What does OBDII code B067A:05 mean?
Code B067A:05 indicates a problem with the Rollover Protection OFF Indicator Circuit, specifically high voltage or an open circuit.
2. What are the common symptoms of code B067A:05?
Symptoms may include the Rollover Protection OFF indicator light not functioning properly, intermittent or no illumination, or other dashboard warning lights.
3. What causes code B067A:05?
Common causes include a faulty indicator bulb, damaged wiring or connectors, or a malfunctioning control module.
4. Can I drive with code B067A:05 active?
While the vehicle may still be drivable, the code suggests an issue with the rollover protection system indicator, which could affect safety information visibility.
5. How do I diagnose code B067A:05?
Start by inspecting the wiring and connectors for damage or corrosion, followed by checking the bulb or LED in the indicator circuit.
6. How do I fix code B067A:05?
Repairs may include replacing the damaged wiring, connectors, or indicator bulb, or reprogramming or replacing the control module if necessary.
7. What tools are needed to troubleshoot code B067A:05?
Tools needed include a multimeter for voltage checks, a diagnostic scanner, and possibly a wiring diagram for the Rollover Protection OFF indicator circuit.
8. Can a bad battery cause code B067A:05?
A weak or failing battery can cause electrical anomalies, but it is not a common cause for this specific code.
9. How much does it cost to fix code B067A:05?
Repair costs can range from $50 to $300, depending on whether the issue is simply a bulb replacement or requires module repairs.
10. Will clearing the code fix B067A:05?
Clearing the code may temporarily remove the warning, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for B067A:05 OBDII Code
Code B067A:05 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.