B067A:02 Code - Rollover Protection OFF Indicator Circuit Short to Ground
Quick Answer
The B067A:02 diagnostic trouble code (DTC) indicates that there is a short to ground in the circuit of the rollover protection OFF indicator. Common causes include Damaged wiring or connectors in the indicator circuit, Faulty rollover protection OFF indicator switch, Malfunctioning control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067A:02 indicates Rollover Protection OFF Indicator Circuit Short to Ground.
- Common causes
- Common causes include Damaged wiring or connectors in the indicator circuit, Faulty rollover protection OFF indicator switch, Malfunctioning control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B067A:02 Description
The B067A:02 diagnostic trouble code (DTC) indicates that there is a short to ground in the circuit of the rollover protection OFF indicator. The rollover protection system is a crucial safety feature in modern vehicles that activates in the event of a potential rollover to protect the occupants. The rollover protection OFF indicator is designed to alert the driver when the system is deactivated. A short to ground in this circuit can prevent the indicator from functioning properly, potentially leaving the driver unaware of the system's status.
Common Causes of B067A:02
- Damaged wiring or connectors in the indicator circuit.
- Faulty rollover protection OFF indicator switch.
- Malfunctioning control module.
- Corrosion in the circuit causing a short to ground.
- Previous electrical work or modifications causing a wiring issue.
Symptoms of B067A:02
- Rollover protection OFF indicator not illuminating when the system is deactivated.
- Inconsistent or flickering indicator light.
- Dashboard warning message related to rollover protection system.
- Intermittent or constant check engine light.
How to Fix B067A:02
- Diagnose the issue using a scan tool to confirm the presence of the B067A:02 code and pinpoint the location of the short to ground.
- Inspect the wiring and connectors in the rollover protection OFF indicator circuit for any visible damage or corrosion.
- Test the rollover protection OFF indicator switch for proper functionality.
- Check the control module for any signs of malfunction and ensure it is communicating correctly with the indicator.
- Repair or replace damaged wiring, connectors, switch, or control module as needed to eliminate the short to ground and restore proper operation of the rollover protection OFF indicator.
Cost to Fix B067A:02
The cost of repairing a short to ground in the rollover protection OFF indicator circuit can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair costs for this issue can range from $150 to $500, including parts and labor. However, it's important to note that these are just rough estimates, and actual costs may differ based on the vehicle make and model, the location of the repair shop, and the hourly labor rates. In some cases, the repair may require specialized tools or expertise, which could increase the overall cost. It's recommended to consult with a trusted mechanic or dealership for a more accurate cost estimate tailored to your specific situation.
Tech Notes for B067A:02
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open
Need more information about the B067A:02 code?
Need more information on how to fix the B067A:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067A:02 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067A:02 Code
1. What does the OBDII code B067A:02 mean?
The code B067A:02 indicates a "Rollover Protection OFF Indicator Circuit Short to Ground," meaning there is an electrical short in the circuit that controls the rollover protection off indicator.
2. What are the common symptoms of code B067A:02?
Symptoms include the rollover protection off light not working, staying on constantly, or flickering, along with possible warning messages on the dashboard.
3. What causes the B067A:02 code to appear?
The code is typically caused by a damaged or shorted wiring harness, a faulty rollover protection off indicator bulb or LED, or a malfunctioning control module.
4. Can I continue driving with the B067A:02 code?
While the vehicle may still be drivable, the rollover protection system might not function as intended, which could compromise safety in the event of a rollover.
5. How is the B067A:02 code diagnosed?
A technician will inspect the circuit for damaged or shorted wires, test the indicator light or LED for proper operation, and check the associated control module for faults.
6. What repairs can fix the B067A:02 code?
Repairs may include replacing damaged wiring, repairing short circuits, replacing the indicator light or LED, or reprogramming or replacing the control module.
7. How much does it cost to fix a B067A:02 code?
Repair costs vary depending on the specific issue but can range from $50 to $200 for wiring repairs or light replacement, and up to $500 or more for control module replacement.
8. Can I reset the B067A:02 code without fixing the issue?
Clearing the code with a scan tool may temporarily remove it, but the issue will likely return if the underlying problem is not addressed.
9. Is the B067A:02 code specific to any vehicle makes or models?
This code can appear on various vehicles equipped with a rollover protection system, but diagnosis and repair procedures may vary by manufacturer.
10. What tools are needed to diagnose the B067A:02 code?
Common diagnostic tools include an OBDII scanner, a multimeter for testing circuits, and wiring diagrams specific to the vehicle model.
Discuss the causes and fixes for B067A:02 OBDII Code
Code B067A:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.