Engine-Codes.com
Engine-Codes – GMC – B0560 2015 GMC Sierra

B0560 2015 GMC Sierra Code - Engine RPM Input Circuit Signal Invalid

Quick Answer

The B0560 diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates that there is an issue with the Engine RPM Input Circuit Signal being invalid. Common causes include Faulty crankshaft position sensor, Wiring harness issues, such as a short circuit or open circuit, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0560 2015 GMC Sierra indicates Engine RPM Input Circuit Signal Invalid.
Common causes
Common causes include Faulty crankshaft position sensor, Wiring harness issues, such as a short circuit or open circuit, ECM software malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B0560 2015 GMC Sierra Description

The B0560 diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates that there is an issue with the Engine RPM Input Circuit Signal being invalid. This means that the signal being received by the engine control module (ECM) regarding the engine's revolutions per minute (RPM) is not within the expected parameters. The ECM relies on this signal to make critical decisions regarding fuel injection timing, ignition timing, and other engine functions. When the signal is deemed invalid, it can lead to poor engine performance, reduced fuel efficiency, and potential drivability issues.

OBDII Code B0560 2015 GMC Sierra - Engine RPM Input Circuit Signal Invalid
B0560 2015 GMC Sierra Code - Engine RPM Input Circuit Signal Invalid

Common Causes of B0560 2015 GMC Sierra

  1. Faulty crankshaft position sensor.
  2. Wiring harness issues, such as a short circuit or open circuit.
  3. ECM software malfunction.
  4. Loose or corroded electrical connections.
  5. Engine mechanical problems affecting RPM signal accuracy.

Symptoms of B0560 2015 GMC Sierra

  1. Engine misfires or hesitation during acceleration.
  2. Rough idling or stalling.
  3. Reduced fuel efficiency.
  4. Check Engine Light illuminated on the dashboard.
  5. Difficulty starting the engine.

How to Fix B0560 2015 GMC Sierra

  1. Perform a thorough inspection of the wiring harness and connectors for any visible damage. Repair or replace as necessary.
  2. Test the crankshaft position sensor using a multimeter to ensure it is functioning correctly. Replace if faulty.
  3. Check for any ECM software updates or reprogramming that may address the RPM signal issue.
  4. Clear the DTC and reset the ECM to see if the code reappears after repairs.
  5. Conduct a road test to verify that the engine RPM signal is now within the expected range.

Cost to Fix B0560 2015 GMC Sierra

The typical repair costs for addressing an Engine RPM Input Circuit Signal Invalid code on a 2015 GMC Sierra can range from $150 to $500, depending on the specific cause of the issue and the labor rates at the auto repair shop. Parts such as a new crankshaft position sensor or wiring harness components may also contribute to the total cost. It is advisable to consult with a qualified mechanic or dealership to obtain an accurate estimate based on the vehicle's specific needs. Keep in mind that diagnostic time and labor rates can vary, so it's essential to inquire about these factors before proceeding with the repair.

Need more information about the B0560 2015 GMC Sierra code?

Need more information on how to fix the B0560 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0560 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0560 2015 GMC Sierra Code

1. What does OBDII code B0560 mean on a 2015 GMC Sierra?

Code B0560 indicates an issue with the Engine RPM Input Circuit, specifically that the signal being received is invalid or outside the expected range.

2. What are the common symptoms of code B0560 in a 2015 GMC Sierra?

Symptoms may include erratic engine RPM readings, reduced performance, potential stalling, or the illumination of the check engine light or other warning lights.

3. What causes code B0560 in a GMC Sierra?

Common causes include a faulty crankshaft position sensor, damaged wiring or connectors in the RPM input circuit, or an issue with the vehicle’s engine control module (ECM).

4. Can a dirty or damaged crankshaft position sensor cause code B0560?

Yes, a dirty, damaged, or failing crankshaft position sensor is a frequent cause of this code, as it plays a key role in providing the engine RPM signal.

5. How do you diagnose code B0560 on a 2015 GMC Sierra?

Diagnosis typically involves using a scan tool to confirm the code, inspecting the crankshaft position sensor and its wiring, and testing the signal at the sensor and ECM.

6. Can a loose or corroded connector trigger code B0560?

Yes, loose, corroded, or damaged connectors in the RPM input circuit can disrupt the signal and trigger this code.

7. Is it safe to drive a 2015 GMC Sierra with code B0560?

While the vehicle may still run, driving with this code can lead to poor performance, stalling, and potential engine damage. It is best to address the issue promptly.

8. How is code B0560 fixed on a 2015 GMC Sierra?

Repairs may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if it is faulty.

9. Can a weak battery or electrical issue cause code B0560?

Yes, voltage irregularities or a weak battery can interfere with the RPM input signal and potentially trigger this code.

10. How much does it cost to fix code B0560 on a 2015 GMC Sierra?

Repair costs vary depending on the issue. Replacing a crankshaft position sensor typically costs $150–$300, while ECM repairs or replacements can be more expensive.

Discuss the causes and fixes for B0560 2015 GMC Sierra OBDII Code

Submit a New Comment

Code B0560 2015 GMC Sierra comments

No comments found for this page.