B0508 CADILLAC - Short To Voltage Or BCM Open Internally In The LH DRL Relay Control Circuit
B0508 CADILLAC Possible Causes
- Faulty Left Daylight Running Lamp (DRL) Relay
- Left Daylight Running Lamp (DRL) Relay harness is open or shorted
- Left Daylight Running Lamp (DRL) Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
How is the B0508 CADILLAC code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B0508 CADILLAC code
Labor: 1.0The cost to diagnose the B0508 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B0508 CADILLAC MeaningThe Body Control Module (BCM) provides control for the LH DRL relay circuit. The BCM grounds the Left Daylight Running Lamp (DRL) relay control circuit in order to energize the LH DRL relay and turn ON the LF turn signal This allows the LF turn signal to be used for DRL and approach lighting functions. The BCM monitors the voltage level on the LH DRL relay control circuit. When the BCM commands the relay ON, the voltage level on the LH DRL relay control circuit should be low. When the relay is OFF, the voltage on the LH DRL relay control circuit should be high. If the BCM detects a voltage level other than expected, a malfunction is present and a Diagnostic Trouble Code (DTC) will set.
More InformationNeed more information on how to fix the B0508 CADILLAC code?
Get Access to Factory Service Manuals