Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the B0502 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The Body Control Module (BCM) provides control for the Right Daylight Running Lamp (DRL) relay circuit. The BCM grounds the RH DRL relay control circuit in order to energize the RH DRL relay and turn ON the RF turn signal. This allows the RF turn signal to be used for DRL and approach lighting functions. The BCM monitors the voltage level on the RH DRL relay control circuit. When the BCM commands the relay ON, the voltage level on the RH DRL relay control circuit should be low. When the relay is OFF, the voltage on the RH DRL relay control circuit should be high. If the BCM detects a voltage level other than expected, a malfunction is present and a Diagnostic Trouble Code (DTC) will set.
Need more information on how to fix the B0502 code? Get Access to Factory Service Manuals
Get the B0502 code diagnosed by a professional: Find a repair shop in your area