Engine-Codes - Chevrolet - B0413 2018 Chevrolet Silverado

B0413 2018 Chevrolet Silverado Code - Main Temperature Control Feedback Circuit

- Code Popularity: 401 Views
- Repair Importance Level: 1/3
- Repair Difficulty Level: 2/3
Table of contents
ChatAC AutoCodes.com AI Chat

What are the Possible Causes of the DTC B0413 2018 Chevrolet Silverado?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Faulty Drivers Air Temperature Actuator
  • Drivers Air Temperature Actuator harness is open or shorted
  • Drivers Air Temperature Actuator circuit poor electrical connection

Code Tech Notes

B0413:02 Main Temperature Control Feedback Circuit Short to Ground
B0413:05 Main Temperature Control Feedback Circuit Short to Battery or Open
B0413:61 Main Temperature Control Feedback Circuit Actuator Stuck Open

⚠ Does your Chevrolet have Safety Recalls? → Check here

How to Fix the DTC B0413 2018 Chevrolet Silverado?

Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Search for B0413 2018 Chevrolet Silverado Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

The cost to diagnose the B0413 2018 Chevrolet Silverado code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

What Does the B0413 2018 Chevrolet Silverado Code Mean?

The Heating, Ventilation, and Air Conditioning (HVAC) control module controls the HVAC door actuators to regulate the airflow through the HVAC system. Each actuator consists of an electric motor and a potentiometer. The module supplies a low reference and 5-volt reference source voltage to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. When the actuator shaft rotates, the voltage on the door position signal circuit changes. The control circuit uses either a 0, 2.5, or 5-volt signal to command the actuator movement. When the actuator is at rest, the control circuit value is 2.5 volts. A 0 or 5-volt control signal commands the actuator movement in opposite directions.

B0413 2018 Chevrolet Silverado Code - Main Temperature Control Feedback Circuit

Need more Information on the Code?

Need more information on how to fix the B0413 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0413 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area