B0226 GMC - Recirculate Position Command Circuit High

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

B0226 GMC Possible Causes

  • Faulty Recirculation Actuator
  • Recirculation Actuator harness is open or shorted
  • Recirculation Actuator circuit poor electrical connection
  • Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module

First diagnose B0226 GMC code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the B0226 GMC code

    Labor: 1.0

    The cost of diagnosing the B0226 GMC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

B0226 GMC Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B0226 GMC Meaning

Stepper motors are used for temperature regulation, air distribution control and recirculation door control. With the switches and dials on the HVAC controls, air temperature door position, mode door position and recirculation door position can be selected. The selected values are passed to the Heating, Ventilation, and Air Conditioning (HVAC) Control Module via serial data. The HVAC control module supplies a 12 V reference voltage to the stepper motors and energizes the 4 stepper motor coils with a pulsed ground signal. The stepper motors move the appropriate doors into the calculated positions, in order to reach the desired positions.
OBDII Code B0226 GMC - Recirculate Position Command Circuit High - Engine-Codes.com

B0226 GMC More Information

Need more information on how to fix the B0226 GMC code?
Get Access to Factory Service Manuals

Related Information