B0189 CHEVROLET - Sunload Sensor 2 Circuit Performance
B0189 CHEVROLET Possible Causes
- Faulty Sunload Sensor 2
- Sunload Sensor 2 harness is open or shorted
- Sunload Sensor 2 circuit poor electrical connection
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module
How is the B0189 CHEVROLET code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the B0189 CHEVROLET code
Labor: 1.0The cost to diagnose the B0189 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
B0189 CHEVROLET MeaningThe sunload sensor is a 2-wire photo diode. The vehicle uses left and right sunload sensors. The two sensors are integrated into the sunload sensor assembly along with the ambient light sensor. Low reference and signal circuits enable the sensor to operate. As the sunload increases, the sensor signal decreases. The sensor operates within an intensity range between completely dark and bright. The sensor signal varies between 0-5 volts. The Heating, Ventilation, and Air Conditioning (HVAC) Control Module converts the signal to a range between 0-255 counts. The sunload sensor provides the HVAC control module a measurement of the amount of light shining on the vehicle. Bright or high intensity, light causes the vehicles inside temperature to increase. The HVAC system compensates for the increased temperature by diverting additional cool air into the vehicle.
More InformationNeed more information on how to fix the B0189 CHEVROLET code?
Get Access to Factory Service Manuals