B0150 CADILLAC Code - Air Flow Position Feedback #3 Circuit Malfunction
|B0150 CADILLAC code possible causes
- Faulty Auxiliary Mode Actuator
- Auxiliary Mode Actuator harness is open or shorted
- Auxiliary Mode Actuator circuit poor electrical connection
- Faulty Auxiliary Heating, Ventilation, and Air Conditioning (HVAC) Control Module
|How is the B0150 CADILLAC code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the B0150 CADILLAC code
Labor: 1.0The cost to diagnose the B0150 CADILLAC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B0150 CADILLAC code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is B0150 CADILLAC code meaning?The actuators operate using 5 circuits. A 5-volt reference, low reference, signal circuit and two bi-directional 0 or 12 volt control circuits. The Heating, Ventilation, and Air Conditioning (HVAC) Control Module supplies a low reference and 5-volt reference to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. As the actuator door changes position the door position signal circuit voltage also changes. The two bi-directional control circuits enable the actuator to operate. Both circuits are set to 0 volts when the HVAC control module detects, from the feedback potentiometer, that the actuator is in the desired position. In order to move the actuator, the HVAC control module switches the appropriate control circuit to 12 volts.
|Need more information with the B0150 CADILLAC code?Need more information on how to fix the B0150 CADILLAC code?
Get Access to Factory Service Manuals