B0130 Code - Short Right Seat Belt Pretensioner Squib Circuit

Quick Answer

The B0130 diagnostic trouble code (DTC) indicates a problem with the short right seat belt pretensioner squib circuit in a vehicle. Common causes include Faulty seat belt pretensioner squib, Wiring or connector issues in the circuit, Corrosion or damage to the wiring harness. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means

B0130 indicates Short Right Seat Belt Pretensioner Squib Circuit.

Common causes

Common causes include Faulty seat belt pretensioner squib, Wiring or connector issues in the circuit, Corrosion or damage to the wiring harness.

Severity

High - diagnose this code as soon as possible.

Can I drive?

Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

• Description
• Common Causes
• Symptoms
• How To Fix
• Cost to Fix
• FAQs
• Comments
• Add Comment

Common Causes of B0130

Symptoms of B0130

How to Fix B0130

Cost to Fix B0130

Need more information about the B0130 code?

Need more information on how to fix the B0130 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0130 code diagnosed by a professional: Find a repair shop in your area

Code B0130 Information for Specific Makes

• B0130 Lexus — Short Right Seat Belt Pretensioner Squib Circuit
• B0130 Scion — Short Right Seat Belt Pretensioner Squib Circuit
• B0130 Toyota — Short Right Seat Belt Pretensioner Squib Circuit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

• Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
• Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0130 Code

1. What are the common symptoms of OBDII code B0130?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the right seat belt pretensioner.

2. What does the OBDII code B0130 indicate?

- OBDII code B0130 indicates a fault in the Short Right Seat Belt Pretensioner Squib Circuit.

3. What are possible causes of OBDII code B0130?

- Possible causes include a faulty seat belt pretensioner squib, damaged wiring in the circuit, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B0130?

- Diagnosing the issue may involve using a diagnostic scanner to retrieve the code, inspecting the seat belt pretensioner connections, and testing the circuit for continuity.

5. What should I do if I encounter OBDII code B0130?

- If you encounter OBDII code B0130, it is recommended to have the issue diagnosed and repaired by a qualified mechanic to ensure the safety systems are functioning properly.

6. Can I continue driving with OBDII code B0130?

- It is not advisable to continue driving with OBDII code B0130 present, as it may indicate a potential safety risk with the seat belt pretensioner system.

7. Are there any safety concerns associated with OBDII code B0130?

- Yes, OBDII code B0130 relates to the seat belt pretensioner system, which is an important safety feature designed to secure occupants in the event of a collision.

8. How much does it typically cost to repair OBDII code B0130?

- The cost of repairing OBDII code B0130 can vary depending on the underlying issue, but it may involve replacing the seat belt pretensioner squib or repairing damaged wiring in the circuit.

9. Can resetting the OBDII code B0130 fix the issue?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing OBDII code B0130 to trigger.

10. Is it possible to prevent OBDII code B0130 from occurring?

- While some causes of OBDII code B0130 may be unavoidable, regular maintenance and inspections of the airbag system can help identify and address potential issues before they trigger the code.