B0104 Chevrolet Code - Passenger-Side EFS Not Okay Message
Quick Answer
The B0104 code for Chevrolet vehicles indicates a problem with the passenger-side EFS (Electronic Front Sensor) not being okay, resulting in a warning message being displayed. Common causes include Faulty passenger-side EFS sensor, Wiring or connection issues in the EFS circuit, Corrosion or damage to sensor connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0104 Chevrolet indicates Passenger-Side EFS Not Okay Message.
- Common causes
- Common causes include Faulty passenger-side EFS sensor, Wiring or connection issues in the EFS circuit, Corrosion or damage to sensor connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0104 Chevrolet Description
The B0104 code for Chevrolet vehicles indicates a problem with the passenger-side EFS (Electronic Front Sensor) not being okay, resulting in a warning message being displayed. The EFS is a crucial component of the vehicle's safety system, responsible for detecting impacts and deploying airbags in the event of a collision. When this code is triggered, it means that the system has detected an issue with the passenger-side EFS, which could potentially compromise the proper functioning of the airbag system.
Common Causes of B0104 Chevrolet
- Faulty passenger-side EFS sensor.
- Wiring or connection issues in the EFS circuit.
- Corrosion or damage to sensor connectors.
- Impact or collision that damaged the EFS sensor.
- Software or calibration issues in the airbag control module.
Symptoms of B0104 Chevrolet
- Airbag warning light illuminated on the dashboard.
- Passenger-side airbag may not deploy in a collision.
- Inaccurate or inconsistent readings from the passenger-side EFS.
- Vehicle fails airbag system self-test during startup.
How to Fix B0104 Chevrolet
- Begin by diagnosing the specific cause of the B0104 code using a scan tool to retrieve the trouble codes and data from the EFS system.
- Inspect the wiring and connectors related to the passenger-side EFS sensor for any signs of damage, corrosion, or loose connections.
- Test the EFS sensor itself for proper functionality, following manufacturer's specifications for resistance and voltage readings.
- If the sensor is faulty, replace it with a new OEM sensor and recalibrate the system as needed.
- Clear the trouble codes and perform a test drive to ensure that the B0104 code does not return.
Cost to Fix B0104 Chevrolet
The typical repair costs for addressing a B0104 code on a Chevrolet vehicle can range from $200 to $500, including parts and labor. However, the actual cost may vary depending on the specific cause of the issue, the cost of the replacement parts, and the labor rates at the auto repair shop. It's advisable to consult with a professional mechanic to get an accurate estimate based on the vehicle's make and model. Additionally, factors such as location and dealership vs. independent shop rates can also influence the final cost of the repair.
Need more information about the B0104 Chevrolet code?
Need more information on how to fix the B0104 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0104 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0104 Chevrolet Code
1. What does the OBDII code B0104 for Chevrolet mean?
The B0104 code indicates that there is an issue with the passenger-side EFS (External Front Sensor) system in the vehicle.
2. What are the common symptoms of a B0104 Chevrolet code?
Common symptoms of a B0104 code may include the airbag warning light illuminating on the dashboard, the passenger-side airbag not deploying in an accident, or a "Passenger-Side EFS Not Okay" message on the instrument cluster.
3. What are the possible causes of a B0104 code in a Chevrolet vehicle?
Possible causes of a B0104 code include a faulty passenger-side EFS sensor, damaged wiring or connectors in the airbag system, or a malfunction in the airbag control module.
4. How can I diagnose a B0104 code in my Chevrolet?
Diagnosing a B0104 code typically involves using a diagnostic scanner to retrieve the specific fault code, checking the passenger-side EFS sensor for proper operation, inspecting wiring for damage, and testing the airbag system components for faults.
5. Can I drive my Chevrolet with a B0104 code?
It is not recommended to drive your Chevrolet with a B0104 code present, as it indicates a potential issue with the passenger-side airbag system, which could affect its proper deployment in an accident.
6. How can I repair a B0104 code in my Chevrolet?
Repairing a B0104 code may involve replacing the faulty passenger-side EFS sensor, repairing damaged wiring or connectors, or resetting the airbag control module after fixing the issue.
7. Is it safe to reset the B0104 code in my Chevrolet without fixing the underlying issue?
Resetting the B0104 code without addressing the underlying issue is not recommended, as it may lead to the airbag system not functioning properly in the event of an accident.
8. How much does it cost to repair a B0104 code in a Chevrolet?
The cost of repairing a B0104 code can vary depending on the specific issue causing the code, the labor rates of the repair shop, and the cost of any replacement parts needed.
9. Can a DIY enthusiast fix a B0104 code in a Chevrolet?
While some DIY enthusiasts may be able to diagnose and repair a B0104 code themselves, it is recommended to have the issue addressed by a professional to ensure the airbag system is functioning correctly.
10. How often does a B0104 code occur in Chevrolet vehicles?
The occurrence of a B0104 code in Chevrolet vehicles can vary and is typically influenced by factors such as vehicle age, maintenance history, and driving conditions.
Discuss the causes and fixes for B0104 Chevrolet OBDII Code
Code B0104 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.