B0104 Cadillac Code - Passenger-Side EFS Not Okay Message
Quick Answer
The B0104 diagnostic trouble code for Cadillac vehicles indicates that there is an issue with the passenger-side Electronic Front Sensor (EFS) not sending the correct signal. Common causes include Faulty passenger-side EFS sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting the sensor's signal. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0104 Cadillac indicates Passenger-Side EFS Not Okay Message.
- Common causes
- Common causes include Faulty passenger-side EFS sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting the sensor's signal.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0104 Cadillac Description
The B0104 diagnostic trouble code for Cadillac vehicles indicates that there is an issue with the passenger-side Electronic Front Sensor (EFS) not sending the correct signal. The EFS is a crucial component of the vehicle's safety system, as it helps monitor the position and movement of the front passenger in the event of a collision. When the EFS is not functioning correctly, it can affect the deployment of the airbag and other safety features, potentially putting the passenger at risk in the event of an accident.
Common Causes of B0104 Cadillac
- Faulty passenger-side EFS sensor.
- Damaged wiring or connectors leading to the sensor.
- Corrosion or debris affecting the sensor's signal.
- Malfunction in the airbag control module.
- Electrical issues within the airbag system.
Symptoms of B0104 Cadillac
- Airbag warning light illuminated on the dashboard.
- Inability to turn off the passenger-side airbag.
- Faulty or intermittent airbag deployment.
- Loss of communication with the airbag control module.
- Diagnostic trouble code B0104 stored in the vehicle's computer system.
How to Fix B0104 Cadillac
- Begin by diagnosing the specific cause of the B0104 code using a professional diagnostic tool.
- Inspect the wiring and connectors leading to the passenger-side EFS sensor for any damage or corrosion.
- Test the sensor itself to determine if it is sending the correct signal.
- If the sensor is faulty, replace it with a new, OEM-quality sensor.
- Clear the diagnostic trouble code from the vehicle's computer system and perform a test drive to ensure the issue has been resolved.
Cost to Fix B0104 Cadillac
The typical repair costs for addressing a B0104 Cadillac code can vary depending on the specific cause of the issue. In general, replacing a faulty EFS sensor can cost between $150 and $300, including parts and labor. However, additional costs may be incurred if there are wiring or module issues that need to be addressed. It is recommended to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates at auto repair shops can vary, so it's advisable to inquire about local rates for a more precise cost estimate.
Need more information about the B0104 Cadillac code?
Need more information on how to fix the B0104 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0104 Cadillac code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0104 Cadillac Code
1. What are the common symptoms of OBDII code B0104 in a Cadillac related to the Passenger-Side EFS Not Okay Message?
- Common symptoms include the airbag warning light staying illuminated, an error message indicating "Passenger-Side EFS Not Okay," and potential issues with the passenger-side airbag system.
2. What can cause the OBDII code B0104 in a Cadillac to trigger the Passenger-Side EFS Not Okay Message?
- Possible causes include a faulty passenger-side airbag sensor, a wiring issue in the airbag system, or a malfunction in the electronic control unit (ECU) that controls the airbag system.
3. How can I diagnose the OBDII code B0104 in a Cadillac related to the Passenger-Side EFS Not Okay Message?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the passenger-side airbag sensor and related wiring for damage, and checking the ECU for any faults.
4. Is it safe to drive my Cadillac with the OBDII code B0104 triggering the Passenger-Side EFS Not Okay Message?
- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the passenger-side airbag system, which could affect its functionality in the event of a collision.
5. What are the repair options for fixing the OBDII code B0104 in a Cadillac showing the Passenger-Side EFS Not Okay Message?
- Repair options may include replacing the passenger-side airbag sensor, repairing any damaged wiring in the airbag system, or reprogramming the ECU to address any software-related issues.
6. Can I reset the OBDII code B0104 in a Cadillac related to the Passenger-Side EFS Not Okay Message myself?
- While you can clear the fault code with an OBDII scanner, it is essential to address the underlying issue causing the code to prevent it from recurring and ensure the safety of the airbag system.
7. How much does it typically cost to repair the OBDII code B0104 in a Cadillac with the Passenger-Side EFS Not Okay Message?
- The cost of repair can vary depending on the specific cause of the code, but it may range from $100 to $500 or more, including parts and labor.
8. Are there any recalls or technical service bulletins related to the OBDII code B0104 in a Cadillac displaying the Passenger-Side EFS Not Okay Message?
- It is recommended to check with a Cadillac dealership or the National Highway Traffic Safety Administration (NHTSA) website for any relevant recalls or technical service bulletins related to this issue.
9. Will fixing the OBDII code B0104 in a Cadillac with the Passenger-Side EFS Not Okay Message affect the vehicle's safety rating?
- Addressing and resolving the issue causing the code may improve the safety of the vehicle, particularly concerning the proper functioning of the passenger-side airbag system in the event of a collision.
10. Can the OBDII code B0104 in a Cadillac displaying the Passenger-Side EFS Not Okay Message affect the vehicle's overall performance?
- While this code specifically relates to the passenger-side airbag system, addressing it promptly can ensure that all safety features function correctly, maintaining the overall safety and performance of the vehicle.
Discuss the causes and fixes for B0104 Cadillac OBDII Code
Code B0104 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.