Engine-Codes.com
Engine-Codes – Generic – B00CB

B00CB Code - Passenger Seat Occupant Position Sensor 'E'

Quick Answer

The B00CB diagnostic code indicates a fault with the Passenger Seat Occupant Position Sensor 'E' in the vehicle. Common causes include Sensor malfunction due to wear and tear, Electrical issues such as a damaged wiring harness or connector, Water or liquid damage to the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B00CB indicates Passenger Seat Occupant Position Sensor 'E'.
Common causes
Common causes include Sensor malfunction due to wear and tear, Electrical issues such as a damaged wiring harness or connector, Water or liquid damage to the sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B00CB Description

The B00CB diagnostic code indicates a fault with the Passenger Seat Occupant Position Sensor 'E' in the vehicle. This sensor is crucial for detecting whether the passenger seat is occupied, the position of the occupant, and whether the airbag should deploy in the event of a collision. When this sensor malfunctions, it can lead to serious safety issues as the airbag may not deploy correctly or at all, putting the passenger at risk in the event of an accident.

OBDII Code B00CB - Passenger Seat Occupant Position Sensor 'E'
B00CB Code - Passenger Seat Occupant Position Sensor 'E'

Common Causes of B00CB

  1. Sensor malfunction due to wear and tear.
  2. Electrical issues such as a damaged wiring harness or connector.
  3. Water or liquid damage to the sensor.
  4. Corrosion on sensor contacts.
  5. Impact or physical damage to the sensor.

Symptoms of B00CB

  1. Airbag warning light illuminated on the dashboard.
  2. Airbag system error message displayed on the instrument cluster.
  3. Passenger airbag not deploying in a collision.
  4. Inconsistent or erratic behavior of the airbag system.
  5. In some cases, the vehicle may go into a limp mode to protect the occupants.

How to Fix B00CB

  1. Diagnose the issue using a diagnostic scanner to confirm the fault code and pinpoint the exact cause of the problem.
  2. Inspect the wiring harness and connectors for any damage and repair or replace as necessary.
  3. Replace the Passenger Seat Occupant Position Sensor 'E' with a new one.
  4. Clear the fault code from the system and perform a test to ensure the issue has been resolved.
  5. Reset the airbag system to ensure proper functionality.

Cost to Fix B00CB

The cost of repairing the Passenger Seat Occupant Position Sensor 'E' can vary depending on the make and model of the vehicle, the location of the repair shop, and the specific cause of the issue. On average, the replacement sensor itself can cost between $100 to $300, with additional costs for labor and diagnostic fees. The total repair cost can range from $200 to $500 or more. It is advisable to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of your vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and shop rates.

Need more information about the B00CB code?

Need more information on how to fix the B00CB code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B00CB code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B00CB Code

No Frequently Asked Questions about B00CB Code found.

Discuss the causes and fixes for B00CB OBDII Code

Submit a New Comment

Code B00CB comments

No comments found for this page.