B0098 2017 Chevrolet Silverado Code - Passenger Air Bag Disable Switch
Quick Answer
The B0098 code on a 2017 Chevrolet Silverado indicates a problem with the passenger airbag disable switch. Common causes include Faulty passenger airbag disable switch, Wiring or connector issues in the airbag system, Malfunctioning airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0098 2017 Chevrolet Silverado indicates Passenger Air Bag Disable Switch.
- Common causes
- Common causes include Faulty passenger airbag disable switch, Wiring or connector issues in the airbag system, Malfunctioning airbag control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0098 2017 Chevrolet Silverado Description
The B0098 code on a 2017 Chevrolet Silverado indicates a problem with the passenger airbag disable switch. This switch is designed to allow the passenger airbag to be turned off in certain situations, such as when a child is seated in the front passenger seat. When this code is triggered, it means that there is a malfunction in the system that controls the disable switch.
Common Causes of B0098 2017 Chevrolet Silverado
- Faulty passenger airbag disable switch.
- Wiring or connector issues in the airbag system.
- Malfunctioning airbag control module.
- Impact or damage to the passenger airbag system components.
- Electrical issues within the airbag system.
Symptoms of B0098 2017 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard.
- Inability to turn off the passenger airbag using the disable switch.
- Warning message indicating a fault with the airbag system.
- Intermittent or erratic behavior of the passenger airbag system.
How to Fix B0098 2017 Chevrolet Silverado
- Begin by diagnosing the specific cause of the B0098 code using a diagnostic scanner to pinpoint the exact issue.
- Inspect the wiring and connectors associated with the passenger airbag disable switch for any damage or corrosion. Repair or replace as needed.
- Test the passenger airbag disable switch itself to ensure it is functioning properly. Replace if faulty.
- Check the airbag control module for any faults or malfunctions. Replace if necessary.
- Clear the B0098 code from the vehicle's computer system and perform a test to ensure the issue has been resolved.
Cost to Fix B0098 2017 Chevrolet Silverado
The cost of repairing the passenger airbag disable switch issue can vary depending on the specific cause of the problem and the extent of the repairs needed. On average, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $100 to $200. Overall, the total repair cost for addressing the B0098 code on a 2017 Chevrolet Silverado could be between $200 and $500. It is recommended to consult with a professional mechanic to get an accurate estimate based on the specific circumstances of the vehicle. Labor rates at auto repair shops can vary, so it's advisable to inquire about rates in your local area.
Tech Notes for B0098 2017 Chevrolet Silverado
B0098:02 Passenger Air Bag Disable Switch Circuit Short Circuit to Ground
B0098:04 Passenger Air Bag Disable Switch Circuit Open
Need more information about the B0098 2017 Chevrolet Silverado code?
Need more information on how to fix the B0098 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0098 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0098 2017 Chevrolet Silverado Code
1. What does OBDII code B0098 on a 2017 Chevrolet Silverado indicate?
The B0098 code specifically relates to the Passenger Air Bag Disable Switch circuit in the vehicle.
2. What are the common symptoms of a B0098 code in a 2017 Chevrolet Silverado?
Common symptoms include the airbag warning light illuminating on the dashboard and the passenger airbag potentially not deploying in the event of a collision.
3. What can cause the B0098 code to appear in a 2017 Chevrolet Silverado?
The code may be triggered by a malfunction in the Passenger Air Bag Disable Switch circuit, a faulty switch itself, damaged wiring, or a problem with the airbag control module.
4. How can I diagnose the cause of a B0098 code in a 2017 Chevrolet Silverado?
A thorough inspection of the Passenger Air Bag Disable Switch, its wiring, and the airbag control module is necessary. Using an OBDII scanner to retrieve the specific fault codes can also help pinpoint the issue.
5. Can I continue driving my 2017 Chevrolet Silverado with a B0098 code?
It is not recommended to continue driving with an unresolved B0098 code, as it indicates a potential issue with the passenger airbag system, compromising safety in the event of an accident.
6. How can I repair a B0098 code in my 2017 Chevrolet Silverado?
Repairing the B0098 code may involve replacing the Passenger Air Bag Disable Switch, repairing damaged wiring, or resetting the airbag control module after addressing the underlying cause.
7. Is it possible to reset the B0098 code in a 2017 Chevrolet Silverado without repairs?
While clearing the code temporarily with an OBDII scanner is possible, it is crucial to address the root cause to ensure the passenger airbag system functions correctly.
8. Does the B0098 code in a 2017 Chevrolet Silverado affect the driver's airbag deployment?
The B0098 code specifically relates to the Passenger Air Bag Disable Switch, so it does not directly impact the driver's airbag deployment unless there is a separate issue with the system.
9. Are there any safety precautions to take if the B0098 code appears in my 2017 Chevrolet Silverado?
If the B0098 code triggers the airbag warning light, it is essential to have the passenger airbag system inspected by a professional to ensure it functions as intended for passenger safety.
10. Can a DIY enthusiast address the B0098 code in a 2017 Chevrolet Silverado?
While some basic inspections and repairs may be possible for DIY enthusiasts, dealing with airbag systems can be complex and dangerous. It is advisable to seek professional assistance for B0098-related issues.
Discuss the causes and fixes for B0098 2017 Chevrolet Silverado OBDII Code
Code B0098 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.