B0098 2014 GMC Sierra Code - Passenger Air Bag Disable Switch
Quick Answer
The B0098 code for a 2014 GMC Sierra relates to the passenger airbag disable switch. Common causes include Faulty passenger airbag disable switch, Wiring or electrical issues in the circuitry, Loose connections or poor grounding. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0098 2014 GMC Sierra indicates Passenger Air Bag Disable Switch.
- Common causes
- Common causes include Faulty passenger airbag disable switch, Wiring or electrical issues in the circuitry, Loose connections or poor grounding.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0098 2014 GMC Sierra Description
The B0098 code for a 2014 GMC Sierra relates to the passenger airbag disable switch. This code indicates that there is an issue with the passenger airbag system, specifically with the switch that allows the airbag to be turned on or off. The passenger airbag disable switch is a safety feature that allows the airbag to be deactivated when a child or infant is seated in the front passenger seat. When this code is triggered, it means that there is a malfunction in the switch or its circuitry, which could potentially prevent the airbag from deploying in the event of a collision.
Common Causes of B0098 2014 GMC Sierra
- Faulty passenger airbag disable switch
- Wiring or electrical issues in the circuitry
- Loose connections or poor grounding
- Corrosion or damage to the switch or wiring
- Software glitches or malfunctions in the airbag control module
Symptoms of B0098 2014 GMC Sierra
- Airbag warning light illuminated on the dashboard
- Inability to turn off the passenger airbag
- Erratic behavior of the airbag system
- Safety system warning messages on the instrument cluster
How to Fix B0098 2014 GMC Sierra
- Begin by diagnosing the specific cause of the B0098 code using a diagnostic scanner to pinpoint the exact issue with the passenger airbag disable switch.
- Inspect the wiring and connections related to the switch to check for any damage, corrosion, or loose connections. Repair or replace any damaged components as needed.
- Test the passenger airbag disable switch itself to ensure it is functioning correctly. Replace the switch if it is found to be faulty.
- Clear the B0098 code from the vehicle's computer using the diagnostic scanner to reset the airbag system and turn off the warning light.
- Perform a thorough test drive to verify that the repair was successful and that the airbag system is functioning properly.
Cost to Fix B0098 2014 GMC Sierra
The typical repair costs for addressing the B0098 code on a 2014 GMC Sierra can range from $200 to $500, including parts and labor. However, it is important to note that the actual cost may vary depending on the specific diagnosis time, labor rates, and any additional components that may need to be replaced. It is recommended to consult with a trusted auto repair shop to obtain a more accurate estimate based on the individual circumstances of the vehicle.
Tech Notes for B0098 2014 GMC Sierra
B0098:02 Passenger Air Bag Disable Switch Circuit Short Circuit to Ground
B0098:04 Passenger Air Bag Disable Switch Circuit Open
Need more information about the B0098 2014 GMC Sierra code?
Need more information on how to fix the B0098 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0098 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0098 2014 GMC Sierra Code
1. What does OBDII code B0098 for a 2014 GMC Sierra indicate?
The B0098 code in a 2014 GMC Sierra relates to a problem with the Passenger Air Bag Disable Switch circuit.
2. What are the common symptoms of a B0098 code in a 2014 GMC Sierra?
Common symptoms include the airbag warning light illuminating on the dashboard and the passenger airbag being disabled.
3. What are possible causes of the B0098 code in a 2014 GMC Sierra?
Potential causes of the B0098 code include a faulty Passenger Air Bag Disable Switch, damaged wiring or connectors in the circuit, or a malfunctioning airbag control module.
4. How serious is a B0098 code in a 2014 GMC Sierra?
A B0098 code should be addressed promptly, as it indicates a potential issue with the passenger airbag system, which is a critical safety feature in the vehicle.
5. Can I continue to drive my 2014 GMC Sierra with a B0098 code?
It is not recommended to drive the vehicle with a B0098 code present, as it may compromise the functionality of the passenger airbag system.
6. How can I diagnose and repair a B0098 code in my 2014 GMC Sierra?
Diagnosing and repairing a B0098 code typically involves inspecting the Passenger Air Bag Disable Switch, checking the wiring and connectors for damage, and testing the airbag control module for faults.
7. Is it safe to reset the B0098 code in a 2014 GMC Sierra using an OBDII scanner?
While resetting the code may temporarily turn off the warning light, it is important to diagnose and address the underlying issue causing the B0098 code to ensure the proper functioning of the passenger airbag system.
8. Can I fix a B0098 code in a 2014 GMC Sierra myself, or should I take it to a mechanic?
If you have experience with automotive repairs and the necessary tools, you may be able to address a B0098 code yourself. However, if you are unsure or uncomfortable with the repair process, it is best to seek assistance from a qualified mechanic.
9. How much does it typically cost to repair a B0098 code in a 2014 GMC Sierra?
The cost of repairing a B0098 code can vary depending on the specific cause of the issue and whether you perform the repairs yourself or take the vehicle to a mechanic. It's recommended to obtain estimates from local repair shops for an accurate cost assessment.
10. Are there any recalls or technical service bulletins related to the B0098 code in a 2014 GMC Sierra?
To determine if there are any recalls or technical service bulletins related to the B0098 code in your specific vehicle, you can check with a GMC dealership or search online using your vehicle's VIN number.
Discuss the causes and fixes for B0098 2014 GMC Sierra OBDII Code
Code B0098 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.