B0091 2015 Chevrolet Silverado Code - Center Front Impact Sensor
Quick Answer
The B0091 diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado refers to an issue with the center front impact sensor. Common causes include Sensor wiring or connector issues, Sensor damaged due to impact or corrosion, Faulty sensor module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0091 2015 Chevrolet Silverado indicates Center Front Impact Sensor.
- Common causes
- Common causes include Sensor wiring or connector issues, Sensor damaged due to impact or corrosion, Faulty sensor module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B0091 2015 Chevrolet Silverado Description
The B0091 diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado refers to an issue with the center front impact sensor. This sensor is a crucial component of the vehicle's safety system, as it is responsible for detecting impacts to the front of the vehicle and triggering the deployment of airbags in the event of a collision. When this sensor malfunctions or fails, it can compromise the effectiveness of the airbag system, putting occupants at risk in the event of a crash.
Common Causes of B0091 2015 Chevrolet Silverado
- Sensor wiring or connector issues
- Sensor damaged due to impact or corrosion
- Faulty sensor module
- Issues with the airbag control module
- Electrical system malfunctions
Symptoms of B0091 2015 Chevrolet Silverado
- Airbag warning light illuminated on the dashboard
- Airbags not deploying in a collision
- Inconsistent or erratic airbag deployment
- Vehicle may fail safety inspections or crash tests
- Loss of communication with the airbag control module
How to Fix B0091 2015 Chevrolet Silverado
- Diagnose the issue by using a scan tool to retrieve the specific DTC and pinpoint the problem with the center front impact sensor.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the sensor for proper functionality and replace if it is found to be faulty.
- Check the airbag control module for any issues and address them accordingly.
- Clear the DTC from the vehicle's computer system and perform a test to ensure proper airbag deployment.
Cost to Fix B0091 2015 Chevrolet Silverado
The cost of repairing a center front impact sensor can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the parts for this repair can range from $100 to $300, while the labor costs can be between $150 and $300. Overall, the total repair cost for this issue may fall between $250 and $600. It's important to note that these are rough estimates, and actual costs may vary based on the location, vehicle make and model, and labor rates at the auto repair shop. It's recommended to consult with a professional mechanic for a more accurate cost estimate.
Tech Notes for B0091 2015 Chevrolet Silverado
B0091:02 Center Front Impact Sensor Short to Ground
B0091:05 Center Front Impact Sensor Short to Battery or Open
B0091:0F Center Front Impact Sensor Erratic
B0091:39 Center Front Impact Sensor Internal Electronic Failure
B0091:3A Center Front Impact Sensor Incorrect Component Installed
B0091:71 Center Front Impact Sensor Invalid Serial Data Received
Need more information about the B0091 2015 Chevrolet Silverado code?
Need more information on how to fix the B0091 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0091 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0091 2015 Chevrolet Silverado Code
1. What does the OBDII code B0091 for a 2015 Chevrolet Silverado indicate?
The B0091 code specifically relates to the Center Front Impact Sensor on a 2015 Chevrolet Silverado.
2. What are the common symptoms of a B0091 code in a 2015 Chevrolet Silverado?
Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system deployment.
3. What are the possible causes of the B0091 code in a 2015 Chevrolet Silverado?
Potential causes include a malfunction or damage to the Center Front Impact Sensor, wiring issues, or a faulty airbag control module.
4. How can I diagnose the B0091 code in my 2015 Chevrolet Silverado?
Diagnosis typically involves using an OBDII scanner to read the code, inspecting the Center Front Impact Sensor and related wiring for damage, and testing the airbag system components.
5. Can I drive my 2015 Chevrolet Silverado with a B0091 code?
It is not recommended to drive the vehicle with a B0091 code present, as it may indicate a problem with the airbag system, compromising your safety in the event of a collision.
6. How can I repair the B0091 code in my 2015 Chevrolet Silverado?
Repair options may include replacing the Center Front Impact Sensor, repairing damaged wiring, or addressing issues with the airbag control module as needed.
7. Is it safe to reset the B0091 code in a 2015 Chevrolet Silverado without addressing the underlying issue?
Resetting the code without fixing the root cause can temporarily clear the warning light but will not resolve the potential safety issue with the airbag system.
8. Can a DIY enthusiast fix the B0091 code in a 2015 Chevrolet Silverado?
While some may be able to address simple wiring issues, dealing with airbag system components like the Center Front Impact Sensor is best left to trained professionals due to safety concerns.
9. How much does it cost to repair the B0091 code in a 2015 Chevrolet Silverado?
Repair costs can vary depending on the specific issue, but replacing the Center Front Impact Sensor or addressing wiring problems may range from a few hundred to a thousand dollars.
10. How often should the Center Front Impact Sensor be inspected in a 2015 Chevrolet Silverado to prevent the B0091 code from appearing?
Regular inspections as part of routine maintenance or after any significant front-end impact can help prevent issues with the Center Front Impact Sensor and potential triggering of the B0091 code.
Discuss the causes and fixes for B0091 2015 Chevrolet Silverado OBDII Code
Code B0091 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.